Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Operating field
The power socket is available for connecting an elect¬rical tool.
Caution! The electrical tool must be switched off during connection. The
power socket is permanently supplied with voltage when the plug is in the
mains socket regardless of the switch setting. In switch setting "OFF" the
power socket could still be used as an extension cable (e.g. for lights).
Connected load: Suction unit and connected unit max. 16 A.
•
Open the two catches on the container and remove the motor head.
•
Fill the water container with water up to the MAX mark - see picture
page 2 .
•
Insert the filter bag correctly by pushing the opening with the
sealing cap downwards as far as it will go onto the intake
socket.
•
Place the motor head on the container and close the catches.
•
Connect the suction hose to the socket provided.
•
Connect the water hose to the Gardena connection provided
Before use
Pumping – water supply to drill bit
without suction,
Emptying the unit
Suction
– Suction of water,
without water supply
Circulation – normal operation - drill bit
is supplied with cooling water,
boron sludge is sucked out
and treated
OFF
– Unit is switched off
ON
– nit is permanently switched on
depending on the mode (see
above) - unit is permanently
switched on
AUTO – unit switches on when the power
tool is power tool is connected,
as soon as the power tool is
is put into operation
16
Advertenties
Inhoudsopgave
