Advertenties
Beschikbare talen
Beschikbare talen
REMOTE CONTROL
This controls all the functions.
Key to buttons and display:
: to turn off and on (to go from "remote control on standby" to "remote control on")
+/- : to increase/decrease the various regulations
A
: to select Automatic function
M
: to select Manual function and access the control and programming menus
The display also shows other useful information in addition to
the icons described above.
- Stand-by position:
shows room temperature (20°C), kg of pellets (15 kg) remai-
ning in tank and current time (15:33)
- Manual work phase:
shows power set (Power 1), room temperature (20°C), kg of
pellets and autonomy remaining (15 kg 21 hrs)
- Automatic work phase:
shows temperature set (Set 22°C), room temperature (20°C),
kg of pellets and autonomy remaining (15 kg 21 hrs).
DO NOT PRESS THE BUTTON MORE THAN ONCE
.
Note: If the radio control is not used for a few seconds, the
display will go dark as it has moved into the power-saving fun-
ction. The display can be reactivated by pressing any button.
INSTRUCTIONS FOR USE
- 38
- icon fl ashing: remote control searching for network
- icon fi xed: remote control with connection enabled
keypad locked (press "A" and "M" in parallel for a few seconds
to lock or unlock the keypad)
fl at battery (3 mini alkaline batteries type AAA)
programming enabled
alphanumeric display consisting of 16 fi gures arranged in two
lines of 8 fi gures
- icon fl ashing: stove turning on
- icon fi xed: stove working
manual adjustment function (display shows working power)
automatic function (display shows temperature)
ONLY FOR SALLY PLUS
Push quickly "m" to enter into the MENU for the FAN SET-
TINGS. Inside the menu FAN SETTINGS, pushing "+" it
shows as follow :
- FRONT FAN
- FAN CANALIZ.
- SET CANALIZ.
• Inside the menu "FRONT FAN" it's possible to choose ON or
OFF by "M". To quit push
• Inside the menu "FAN CANALIZ" it's possible to choose ON
or OFF by "M", if "FRONT FAN" is ON it shows on the di-
splay the percentage of ducting (ex. 50%), it's possible to adjust
it from 30% to 90%, if "FRONT FAN" is OFF, it's not possible
to adjust the percentage of ducting. To quit push
• Inside the menu "SET CANALIZ." Pushing "M" it shows
SET CAN. MAN. – SET NOT ACTIVE – EXT NOT ACTIVE,
to quit push
.
Activate the automatic ducting sown as "CANALIZ.SET 20°",
it's possible by an option probe (cod. 100290) and it must be
activated only by EDILKAMIN technical service.
To activate the handling of ducting by remote control (ex room
chrono-thermostat) shown as "EXTERNAL SET" it needs a
connection option cable (cod. 640560) and it must be activated
only by EDILKAMIN technical service.
-
.
.
Advertenties
