Be aware of the permissible total weight of the waste
container when transporting it with a crane and adhere
to the applicable legal regulations.
Inserting the dust bag
Insert the dust bag:
1. Apply the parking brake.
2. Unlock and lower the container.
3. Pull out the container by the handle.
4. Insert the dust bag. Take care to ensure that the dust
bag sits close to the container wall and base.
5. Pull the edge of the dust collection bag over the
edge of the vacuum cleaner waste container.
6. Fit and lock the container.
Removing the dust bag
1. Apply the parking brake.
2. Unlock and lower the container.
3. Switch on the device to avoid releasing dangerous
dusts.
4. Pull out the container by the handle.
5. Pull the dust bag upwards.
6. Seal the dust bag tightly with the closing strip under-
neath the opening.
7. Dispose of the dust bag in accordance with statutory
regulations.
Closing the suction connection
WARNING
Danger of injury
Damage to the skin, lungs and eyes through fine dust
The suction connection must be closed using the con-
nection bushing after removing the suction hose.
1
Fit the connection bushing exactly in the suction
connection and push all the way in.
2
Turn the connection bushing all the way to the right
to close the suction connection.
Shutting down
Switching off the device
1. Switch off the device at the main switch.
2. Pull out the mains plug.
1. Switch off the device.
2. Pull out the mains plug.
3. Remove the accessory and, if necessary, flush it out
with water and allow to dry.
4. Empty the vacuum cleaner waste container, see
chapter Emptying the vacuum cleaner waste con-
tainer.
5. On completion of wet vacuum cleaning:
a Clean and dry the filter.
b Clean the waste container with a moist cloth and
dry it off.
c Close the suction connection using the connec-
tion bushing, see chapter Closing the suction
connection
6. Vacuum off the inside and outside of the device and
clean with a moist cloth.
Information on disposal
The following points are to be observed to when dispos-
ing of the device, operating materials and auxiliary ma-
terials:
● Adhere to the applicable national regulations for
your location
● Adhere to the company-specific regulations
● Dispose of the operating materials and auxiliary ma-
terials according to the respectively applicable safe-
ty data sheets
CAUTION
Risk of injury and damage
When transporting in vehicles, secure the device
against slipping and tipping over according to the appli-
cable guidelines.
CAUTION
Risk of injury and damage
Be aware of the weight of the device during storage.
ATTENTION
Risk of damage
Short-circuit due to high levels of humidity.
Store the device only in dry indoor rooms.
English
Ending operation
Transport
Storage
13