Advertenties
Beschikbare talen
Beschikbare talen
TURBO MODE
In Turbo mode, the stove operates at maximum power for 30 minutes. In Turbo
mode the temperature is pre-set to 30ºC. After 30 minutes, the stove returns to the
mode before the Turbo mode was activated. To select Turbo mode, hold down the
TURBO
mode, hold down the
disappear from the remote control display and be replaced by the output level and
the set temperature. Press
ECONO MODE
In Econo mode, the temperature remains constant. Every 10 minutes the stove
adjusts the power until heat output level 1 is reached. To select Econo mode, hold
down the
play (2) and then push
(1) for at least 2 seconds. The word Econo will disappear from the remote control
display (2). Press
PROGRAMME 1 (ON1 AND OFF1)
5.
ACTIVATE AUTOMATIC MODE (ON1)
6.
Press button
and ON1 symbol will flash on the remote control. Use the buttons
(2&3) to select the desired time (10-minute intervals). To confirm, choose
The desired activation time is shown in the remote control. Press
The display (5) on the stove will show Chrono. See figures 10 and 11.
DEACTIVATE AUTOMATIC MODE (OFF1)
Press button
and OFF1 symbol will flash on the remote control. Use the buttons
7.
(2&3) to select the desired time (10-minute intervals). To confirm, choose
The desired deactivation time is shown in the remote control. Press
firm. The display on the stove will show Chrono. This text will disappear when the
set switch-on time and switch-off time have elapsed. See figure 12.
PROGRAMME 2 (ON2 AND OFF2)
As above but use buttons
4
152
button (1) for more than 2 seconds, and then push
button (1) for at least 2 seconds. The word Turbo (2) will
TURBO
SEND
button (1) for more than 2 seconds, until Econo appears in the dis-
ECONO
(3). To deactivate this mode, hold down the
SEND
(3) to confirm your choice. See figure 9.
SEND
1. The desired switch-on and switch-off timer must be set when the
remote control is switched off.
2. The stove retains the temperature and heat output settings it had
before being switched off.
3. The minimum period of time between switching off and switching on
is 20 minutes. This is the time needed for the stove to complete the
cooling-down phase.
4. After a brief power interruption, the timer mode will have to be set
again.
(1) to switch on the stove according to programme 1. The time
ON 1
(1) to switch off the stove according to programme 1. The time
OFF 1
ON 2
(3) to confirm your choice. See figure 8.
(1) and
(2).
OFF 2
(3). To deactivate this
SEND
button
ECONO
and
(1).
ON 1
(4) to confirm.
SEND
and
(1).
OFF 1
(4) to con-
SEND
Advertenties
