Download Print deze pagina

General Safety Guidelines - TOTALINE TTL-RECO250S Gebruikershandleiding

Advertenties

Beschikbare talen

Beschikbare talen

1.
Read  all safety, operating  guidelines and instructions before opera ting  
this recovery machine. 
2.
Always  think  before  acting,  familiarity  breeds  carelessness,    and 
carelessness can be harmful to your health, or worse, result in death. 
3.
Only a qualified technician should operate this Recovery machine. 
4.
Read all safety information regarding the safe handling of refrigerant 
and refrigerant oil, including the Material Safety Data Sheet.  
 
MSDS sheets can be obtained from your refrigerant supplier..   
5.
Always  wear  safety  goggles  and  protective  gloves  when  working  with 
refrigerants  to  protect  your  skins  and  eyes  from  refrigerant  gases  and 
refrigerant liquid. Avoid getting in touch with causticity liquid or gas. 
6.
Be sure that any room where you are working is thoroughly ventilated. 
7.
Use ONLY authorized refill able refrigerant tanks. It requires the  use of  
recovering tanks with a minimum of 27.6bar working pressure. 
8.
Do not overfill the storage tank. Tank is full at 80% volume. There should 
be enough space for liquid expansion‐ overfilling of the tank may cause a 
violent explosion. 
9.
Do not exceed the working  pressure of  Recovering Tank  cylinder. 
10.
Do  not  mix  different  refrigerants    together  in    one  tank,    or  they  could 
not  be separated or used. 
11.
Before  recovering  the  refrigerant,  the  tank  should  achieve  the  vacuum 
level: ‐0.1mpa, which is for purging non‐condensable gases. 
Each tank was full of nitrogen when it was manufactured in the  factory, thus 
the nitrogen should be evacuated before the first use. 
12.
When the recovery machine is not used, all the valves should be closed. 
Because  the  air  or  the  moisture  of  the  air  may  harm  the  recovery  result  and 
shorten the service life of the recovery machine. 
13.
When using an extension cord, it should be a 14AWG minimum and no  
longer than 7.62 meters (25feet), or it may make the voltage drop and damage 
the compressor. 
14.
A dry filter must always be used and should replaced frequently. 
And each type of refrigerant must have its own filter. For the sake of assuring 
the  normal  operation  of  the  unit,  please  use  the  filter  spe  cified  by  our 
company. High quality dry  filters will  bring high quality services 
15.
Special  care should  be  taken  when   recovering   from   a burned‐out 
All manuals and user guides at all-guides.com
GENERAL SAFETY GUIDELINES 
 
2 EN

Advertenties

loading