36
Installation
14. Remove the plugs (1) on the upper side
of both doors and move them to the
other side.
15. Remove the handle. Unscrew the top
handle bracket from the handle rod
(h1). Unscrew the bottom handle brack-
et from the door (h2)
Unscrew the top handle bracket from
the door (h3).
Install the plug (1).
16. Install the handle in the opposite side.
Re-screw the handle bracket on the
door (h4). Turn the handle bracket with
the handle and screw them to the door
(h5) and the fitted handle bracket (h6).
17. Install the lower door.
18. Install the middle hinge (H) on the op-
posite side.
19. Install the upper door.
20. In your documentation bag you will find the upper hinge necessary to make the re-
versibility. Put the hinge in position and screw it.
21. Make sure that the front board of the door is parallel to the front board of the top.
22. Reposition, level the appliance, wait for at least four hours and then connect it to
the power socket.
Do a final check to make sure that:
• All screws are tightened.
• The magnetic seal adheres to the cabinet.
• The door opens and closes correctly.
If the ambient temperature is cold (i.e. in Winter), the gasket may not fit perfectly to the
cabinet. In that case, wait for the natural fitting of the gasket.
In case you do not want to carry out the above mentioned operations, contact the near-
est After Sales Service Force. The After Sales Service specialist will carry out the reversibil-
ity of the doors at your cost.
All manuals and user guides at all-guides.com
1
h1
h2
h4
h5
h3
h6