Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
en Troubleshooting
Temperature problem
Fault
The temperature differs
greatly from the setting.
Cool-fresh compartment is
too warm or cold.
Noise
Fault
Appliance has a humming
sound.
The appliance bubbles,
buzzes or gargles.
32
All manuals and user guides at all-guides.com
Cause
Different causes are pos-
sible.
Standard setting is too high
or too low, e.g. frost in cool-
fresh compartment.
Cause
Not a fault. A motor is run-
ning, e.g. refrigerating unit,
fan.
Not a fault. Refrigerant flows
through the pipes.
troubleshooting
"Switch off the appliance."
1.
→ Page 20
"Switch the appliance back on after
2.
five minutes." → Page 19
If the temperature is too
‒
warm, check the temperature
again after a couple of hours.
If the temperature is too cold,
‒
check the temperature again
on the following day.
Note: The standard setting of the cool-
fresh compartment is preset at 0. Set-
ting 0 corresponds to a temperature of
around 0 °C. You can set the temperat-
ure in the cool-fresh compartment to
3 settings warmer or colder.
A change in the standard setting will
affect the temperature in the refriger-
ator compartment and the freezer
compartment.
Press
until the temperature
1.
display (refrigerator compartment)
flashes.
To change the setting, press / (Re-
2.
frigerator compartment).
– Setting –3 corresponds to the
coldest setting.
– Setting +3 corresponds to the
warmest setting.
a The selected setting is saved after
one minute.
troubleshooting
No action required.
No action required.
Advertenties
Hoofdstukken
Inhoudsopgave
