Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
VDA 160 and 180
Motor (dis)assembly
Before starting disassembly of the mo-
■
tor, isolate the fan from the mains; first
turn off the operating switch, followed
by the mains switch;
Loosen the screws(11) and remove the
■
motor cover(3);
Loosen the 4 screws(15) on the upper
■
casing(7);
Remove the upper casing;
■
Disconnect the connecting cable;
■
Loosen the four screws. The motor with
■
vane and mounting frame can now be
removed;
Further disassembly is obvious;
■
Assembly is performed in the reverse
■
order;
Switch on the fan; first the mains
■
switch, followed by the operating
switch.
VDA 160-180
15
7
11
1b.
All manuals and user guides at all-guides.com
3
16
14
Failure
In case of any problems first check:
The rotating direction of the vane;
■
The protection;
■
The voltage on the fan;
■
The free rotation of the vane,
■
Before contacting the supplier. Make a
note of the information on the fan type
plate before contacting the supplier.
EN - 13
Advertenties
Inhoudsopgave
