Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
VDA 200 to 560
Disassembly
Before starting disassembly of the mo-
■
tor, isolate the fan from the mains; first
turn off the operating switch, followed
by the mains switch;
Disconnect the connection cable(4)
■
between the motor and external termi-
nal box or mains switch(possibly in the
terminal box);
Loosen the nuts(5) and remove the
■
outer assembly plates(6);
Remove the upper casing(7) and the
■
protective grille(1);
Remove the motor cover(3) by pulling
■
it upwards and pushing the springs(2)
outwards;
Loosen the nuts(8) and remove the inner
■
assembly plates(9);
Remove the motor frame(10) with motor
■
and vane from the fan.
Do not set aside with the vane on the
ground!
Assembly is performed in the reverse
■
order;
Check the free rotation of the vane;
■
Check the rotating direction of the vane
■
(see arrow on fan). Incorrect rotation
may result in the motor burning out;
Switch on the fan; first the mains
■
switch, followed by the operating
switch.
12 - EN
All manuals and user guides at all-guides.com
VDA 200 - 560
1a.
Vane disassembly
Remove the catch plate from the vane;
■
Remove the vane from the motor;
■
Assembly is performed in the reverse
■
order;
If an alignment mark is present on the
■
hub plate of the vane, ensure that this
is aligned opposite the key way on the
motor shaft as this is the position in
which the vane was balanced.
Advertenties
Inhoudsopgave
