The product does not contain any parts that
can be serviced by the user.
Where breakage or damage to LEDs occurs
the product must not be used/energised but
disposed of safely.
Before use
Note: Please remove all packaging material from
the product.
Note: When hanging up the product, make sure
that the chosen hanging location is suitable for the
weight of the product.
Mounting the lampions
(see Fig. B) (for model A, B)
Lay down the lampions
(bigger openings) facing upwards.
Insert the cordless end of the lampion stretcher
into the lampion's upper and lower opening.
While doing so place the the lampion stretcher
bottom centrally onto the rim of the lower opening.
Hold on to the lampion stretcher
eyelets
upwards and hang them onto the
6
hangers
.
7
Use (for all models)
Insert the plug on end of the light chain
the socket of the mains adapter
Turn the connection cap
clockwise to fix the connection. Pay attention to
the seal ring
, otherwise the IP protection is
10
not guaranteed.
Insert the mains adapter
The product is ready to use.
Please note that the power adapter continues to
draw a small amount of power even if the prod-
uct is turned off as long as the power adapter
is plugged into a power outlet. To switch the
product off completely, unplug the power adapter
from the socket.
8
GB/IE/NI
with the eyelets
4
6
8
. Pull the
8
into
1
.
2
of the mains cable
3
into the mains socket.
2
Timer function
The on/timer/off button
functions:
1 x press of
the button:
The product lights up continuously.
2 x press of
the button:
The product lights up continuously for
6 hours and then switches itself off
for 18 hours. The product will then
switch on again for 6 hours at the
allocated time and then switch off
for 18 hours.
Note: The on/timer/off button
green when the timer function has been activated.
3 x press of
the button:
The product is switched off.
Cleaning and care
DANGER OF ELECTRIC
SHOCK! First pull the mains adapter out of the
mains socket.
DANGER OF ELECTRIC
SHOCK! For reasons of electrical safety the product
must never be cleaned with water or other liquids
or immersed in water.
Do not use any solvents, petrol or similar items.
This would damage the product.
Only a dry, lint-free cloth should be used for
cleaning.
Easy to clean for heavy soiling, with a slightly
damp cloth.
After cleaning, plug the mains adapter
into the socket.
Disposal
The packaging is made entirely of recyclable mate-
rials, which you may dispose of at local recycling
facilities.
(see Fig. C) has three
9
lights up in
9
back
2