Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
RADIO OPERATION
1. Press the [FM] button (8);
2.
Adjust radio frequency to your desired station
(19).
Note: For a better reception move the wired antenna (23) around.
TURNTABLE OPERATION
Note: When using the turntable for the first time, unscrew in clockwise sense the
[TRANSPORT SCREW] (27) located on the upper right side of the turntable.
1. Press the [PHONO] button (11);
2. Place a record on the turntable. Place the EP adapter over the central spindle
when playing 45 rpm records;
3. Set the [SPEED SELECTOR] (31) to 33, 45 or 78 rpm according to the record;
4. Release the [TONEARM CLAMP] (29), and remove the stylus protector;
5. Lift up the [TONEARM] (28) with the [LIFT LEVER] (30);
6. Move the [TONEARM] (28) to the beginning of the record;
7. Lift down the [TONEARM] (28) with the [LIFT LEVER] (30);
8. When the record is finished the [TONEARM] (28) will automatically return to the
rest support and the [PLATE] (26) will stop turning. To stop manually, lift up the to-
nearm from the record and return it to the rest support.
Note: Do not stop or turn the [PLATE] (26) manually.
When the unit is moved or transported:
Lock the [TONEARM] (28) with the [TONEARM CLAMP] (29);
•
Place the protective cap on the stylus (even when not in use);
•
Screw the [TRANSPORT SCREW] (27) counterclockwise until you feel re-
•
sistance (do not screw it completely).
CD-MP3 OPERATION
1. Press the [CD] button (9);
2.
Press
[OPEN/CLOSE] (18) to
label up in the CD compartment.
3.
Close the
[CD DOOR]
automatically from the first track.
PROGRAMMING
Up to 99 tracks (MP3, 20 in CD) can be programmed and play in any order.
1. Stop the playback by pressing [STOP] (14);
2. Press [PLAY MODE] (17), the display (6) will show "P01" and flash;
3. Select desired track by using
4. Press [PLAY MODE] (17) again to confirm desired track into the program
memory;
5. Repeat step 3 and 4 to enter additional tracks into the program memory.
6. When all the desired tracks have been programmed, press [PLAY] (13) to play
the disc in the order you have programmed.
Note:
Press [STOP] (14) twice to terminate programmed play.
open the
[CD DOOR]
(12). Focus search is performed and playback will start
[SKIP
-/+] buttons (15/16);
English
by turning the [TUNING KNOB]
(12) and place a CD with the
3
Advertenties
Inhoudsopgave
