4
English
USB OPERATION
1. Press the [CD/USB] button (9);
2. Plug an USB stick into the [USB PORT] (1);
3. Press the [FUNCTION] button (4) to select USB mode;
4.
Playback will start automatically from the first track.
PROGRAMMING
The PROGRAMMING operation is the same as that of CD-MP3.
Notes:
Some mp3 player may not be able to play via the usb socket. this is not a maul-
•
function of the system.
To avoid damage to USB memory, remove it only when the radio is turned off.
•
The USB port is not designed for charging smartphones or other devices.
•
TAPE OPERATION
1. Press the [TAPE] source button (10);
2. Insert a cassette TAPE into the [CASETTE MECHANISM] (22);
3. The system will start playback automatically;
Press [TAPE FORWARD/EJECT] button (21) half way during playback to start ra-
•
pid tape winding in forward direction.
Slightly press the [TAPE FORWARD/EJECT] button (21) again to resume play-
•
back.
Press the [TAPE FORWARD/EJECT] button (21) completely inwards and the cas-
•
sette tape will be ejected.
BLUETOOTH OPERATION
1. Press the [BT] button (7), the BT indicator will light up;
2. Connect your Bluetooth portable device to the ID Bluetooth tagged as "HIF-1993BT";
3. You can now transfer the music to the HIF-1993BT.
Note:
Music control (play, pause, etc) must be done from your ext. device.
AUX-IN OPERATION
1. Press the [PHONO/AUX] button (11);
2.
Use one male to male 3.5mm jack cable (not included) to connect any external
audio device to the AUX-IN socket (25);
3.
Music control (play, pause, etc) must be done from your external device.
DIRECT USB ENCODING
Remark:
No song title will be recorded during encoding mode.
•
To avoid damage to USB memory, remove it only when the radio is turned off.
•
ENCODE FROM BLUETOOTH, PHONO, CASSETTE AND AUX:
1. Plug the USB stick into the [USB PORT] (1);
2. Perform normal playback of the source you want to encode & record;
3. Press the [RECORD] button (5) twice to start encoding. On the display will flash
"REC";