2
English
PRECAUTION
•
INSTRUCTIONS - All the safety and operating instructions should be read before
the radio is operated. The manual should be retained for future reference.
•
HEED WARNINGS - All warnings on the appliance and in the operating instruc-
tions should be adhered to.
•
WATER AND MOISTURE - The appliance should not be used near liquids or in
rooms with a high level of humidity.
•
VENTILATION - The appliance should be situated so that its location or position
does not interfere with its proper ventilation.
•
HEAT - The appliance should be situated away from heat sources such as radia-
tors, stoves or other appliances that produce heat.
•
POWER SOURCE - The radio should be connected to power supply only of the
type described in the operating instructions or as marked on the appliance.
•
POWER CORD PROTECTION -
are not likely to be walked on or pinched by items placed upon/against them.
•
OBJECT AND LIQUID ENTRY - Care should be taken so that objects do not fall
and liquids are not spilled into the enclosure through openings.
•
DAMAGE REQUIRING SERVICE
The appliance should be serviced by qualified service personnel when:
- The power supply cord or plug has been damaged;
- Objects have fallen into or liquids has been spilled into the radio;
- The appliance has been exposed to rain;
- The appliance has been dropped or the enclosure damaged;
- The appliance does not appear to operate normally.
•
SERVICING - The user should not attempt to service the appliance beyond that
descrive in the user operating instructions. All the servicing should be referred to
qualified service personnel
Note: If the display does not function properly or no reaction to operation of any con-
trol may due to the electrostatic discharge. Switch off and disconnect the AC cord
then turn the power back on after a few seconds.
POWER SOURCES
AC POWER: You can power your portable stereo system by plugging the AC power
cord (30) into a wall power outlet. Check that the rated voltage of your appliance
matches your local voltage.
TO USE THE RADIO
1.
Set the Mains [POWER SWITCH] (0) to ON;
2.
Press the [POWER] button (2) to turn ON the unit;
3.
Select the desired audio source by pressing the [SOURCE] button (7 to 11);
4.
(Please see detailed instructions for each Source in the following chapters);
5.
Adjust the volume with the [VOLUME KNOB] (3) to the desired level;
6.
Press and hold the [POWER] button (2) to turn OFF the unit.
Note: When no sound is produced, the unit will switch OFF automat. after 10 minutes.
Power supply cords should be routed so that they