Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
For use during activities that may expose the user to risk of snow avalanche. Avalanches are deadly. Understand
and accept the risks involved before participating in activities that may expose you to avalanche danger. You are
responsible for your own actions and assume the risks of your decisions. This pack may increase your
chances for survival, but it does not guarantee safety in the event of an avalanche. This pack should be used
along with other avalanche safety gear including an avalanche beacon, shovel and probe. Avalanche education
is essential before heading into avalanche terrain. Learn how to avoid avalanches and what to do in case you
are caught by one. In addition to deploying your airbag, swim and fight to stay on top, and attempt to create
an air pocket as the slide begins to slow. Before using this product, read and understand all instructions and
warnings that accompany it, familiarize yourself with its capabilities and limitations and obtain proper training
in the use of the equipment. Practice periodically. Contact Black Diamond if you are uncertain about how to use
this product. Do not modify this product in any way. Avalanche control workers using explosives are advised that
this pack contains electronic equipment which has not been tested for all conditions and which may expose the
user to risks that are not yet known. Be aware of the potential risks of using electronic equipment including, but
not limited to, risks related to overheating, flammability, explosion, electrical interference and static electricity.
Check the manufacturer's website for updated instructions and firmware. Failure to read and follow the
warnings and instructions can result in severe injury or death!
This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or
mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning
use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance.
Cleaning and user maintenance shall not be made by children without supervision.
WARNING! Only charge the battery using the provided JetForce PRO Airbag charger (type: GlobTek, Inc.
GTM91120-3024-T2).
JetForce PRO Backpack
INSTRUCTIONS FOR USE – KEEP INSTRUCTIONS FOR FUTURE REFERENCE
JETFORCE PRO BACKPACK INTRODUCTION
The JetForce PRO Backpack is designed for use in and around areas with the
chance of snow avalanches. This backpack incorporates the JetForce Avalanche
Airbag System, which is designed to improve the chances of surviving an ava-
lanche. By increasing the total volume of the person caught in the slide the airbag
helps keep the victim on the surface, decreasing the chances of a complete burial
and allowing for a faster rescue.
JETFORCE PRO SYSTEM COMPONENTS
See also: Figure 1
1a: Main Cargo Compartment
1b: Deployment Handle Pocket
1c: Deployment Handle
1d: Power Button
1e: System Status Lights
1f: Charge Status Lights
1g: Lithium-Ion Battery
1h: Charging Plug
1i: Airbag Pocket
1j: Airbag Release Post
1k: Release Clip
1l: Release Flap
1m: Electronics Access Flap
1n: JetForce PRO Backpack
Instructions
1o: Charging Power Supply
SYSTEM FUNCTION
When the airbag is deployed by pulling the Deployment Handle (1c), the Release
Clip (1k) is forced open, allowing the Release Flap (1l) to open, and then the inflating
airbag opens the airbag zipper. The airbag can then fully inflate (Figure 2).
SELF-DIAGNOSIS
To ensure that your JetForce PRO Avalanche Airbag will function properly, the
JetForce PRO electronic system performs a comprehensive self-diagnosis on
every system startup. The system checks the battery charge level, motor and fan
operation and all critical electronics such as status lights, trigger electronics and
the battery electronics. The system also performs frequent diagnosis while armed.
A properly working system indicates a pulsing green System Status Light (1e),
located on the Deployment Handle (1c). Warnings/malfunctions are indicated with
a red System Status Light (1e), in conjunction with the blue Charge Status Lights
(1f). Refer to Troubleshooting section of this manual for details.
4
3a: Left Side Buckle
3b: Right Side Buckle
3c: Leg Strap
3d: Leg Strap Storage Pocket
3e: Leg Strap Clip
3f: Leg Strap Loop
3g: Sternum Strap
5a: Fan Housing
5b: Air Release Button
5c: Deflate Access Port
5d: Airbag Pocket Zipper Pull
5e: Zipper Warning Label
8a: Zip-On Booster Pack
8b: JetForce PRO Base Unit
8c: Booster Pack Zipper Pulls
8d: Booster Pack Zipper Ends
WARNING
DEVICE MANAGEMENT WITH THE PIEPS APP
A
Before First Use:
1. Download the Pieps app using an iOS or Android device:
2. Log into or create a Pieps account using the Pieps app or through
my.pieps.com/Account/Register.
3. Use the Pieps app to update your device to the latest firmware version and
perform a device check:
• Activate Bluetooth (see "Entering Bluetooth Mode" below).
• Connect to the device through the "Device Manager" tab of the Pieps app.
• Follow prompts to update your firmware if a new version is available.
• Select "Device Check" and follow all prompts.
Entering Bluetooth Mode
The JetForce PRO system can be wirelessly connected to the Pieps app, which is
available for both Android and iOS devices with Bluetooth 4.0 or higher. The app
provides system information and allows you to install updated firmware, adjust
system parameters, and troubleshoot the system. The system can be connected to
your Bluetooth device using the following procedure:
1. With the system disarmed, press the red Power Button (1d) 5 times within 3
seconds to enter Bluetooth mode.
2. When the system is in Bluetooth mode and is searching for a connection, the
first and second blue Charge Status Lights (1f) will alternate.
3. When the system has successfully connected to your device, the first and sec-
ond blue Charge Status Lights (1f) will still alternate, while the third and fourth
Charge Status Lights (1f) will go solid.
4. Follow the instructions in the Pieps app to make the required system checks
and updates.
5. To exit Bluetooth mode, disconnect the system using the app and wait 30 sec-
onds. The system will return to a disarmed state. Alternatively, you can use the
normal disarm process.
A
NOTICE! The user is responsible for keeping their Jetforce pack firm-
ware up to date. We recommend checking for updates at the beginning of
every season, and checking monthly when equipment is in regular use.
BATTERY CHARGING
Always make sure the system has a full charge before heading out into avalanche
terrain.
A
WARNING! Charge Lithium batteries only under supervision!
A
WARNING! The airbag may deploy if the Deployment Handle is pulled
anytime the lights are illuminated, even during charging.
Advertenties
Inhoudsopgave
