Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
CONTROLS
Extra characteristics electronic flame failure device
Igniting, adjusting and flame failure device
Operating the electronic flame failure device
(HG62..C/HG77..C /HG92..C/HG97..C)
Press the central On/Off button.
The green button is lit.
Turn the required control knob anti-clockwise. There is no need to
keep the knob depressed or to hold it.
The burner ignites immediately. The flame failure device checks to see if
there is a flame.
If all the control knobs are turned to the 0-setting, the central On/Off
button automatically turns off after 3 minutes.
Operation from the front
(HG42..C)
Depress the control knob on the oven or the control panel and turn it
anti-clockwise towards the ignition zone.
The burner ignites immediately. The flame failure device will switch on.
There is no need to keep the knob depressed or to hold it.
This hob is also equipped with a re-ignition device and a cooking time
limiter
If your gas hob comes with an electronic flame failure device, you can
use the following features:
Re-ignition
If the flame goes out during cooking, the device will automatically
attempt to restart the flame.
If no flame is detected within 10 seconds of the attempt to re-ignite the
burner, the gas supply to the burner will be cut off.
Emergency stop
If you need to switch off the gas hob in one go, press the central
On/Off button.
Childproof lock
You can lock the gas hob. This prevents the accidental ignition of the
burners. The gas hob can be locked and unlocked by depressing the
GB 10
(HG62..C/HG77..C/HG92..C/HG97..C)
Advertenties
Hoofdstukken
Inhoudsopgave
