Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
SilverCrest SDI 3500 C3
cookware getting hotter than the temperature selected. In order to reach the selected temperature quickly,
you can use the boost function after selecting the temperature.
7.3 Power levels and associated electrical power
Below is a short overview of the different power levels, with power consumption figures in Watts.
Left heating zone (1)
Level
L01
L02
L03
L04
L05*
L06
L07
L08
L09
L10
* default power level when switching on heating zone (1) or (3)
7.4 Switching off using the timer
You can program the timer to switch the induction hotplate off automatically after a preset time.
1.
When cooking, press the sensor button for the timer
program the timer for this heating zone (1, 3).
2.
Use the – (12) and + (14) buttons to set the cooking time you want (minutes) before the heating
zone (1 or 3) is to switch off.
You can program the cooking time to between 1 and 180 minutes.
The time set flashes briefly and then the remaining time (countdown) is shown on the display (13).
If the timer is activated, the indicator (6) lights up and the display (13) alternates showing the power level
or temperature and the remaining time at around 5 second intervals.
If necessary, you can adjust the power level or temperature using the – (12) and + (14) buttons.
Once the countdown reaches zero, the corresponding heating zone (1, 3) automatically switches off. A
beeper sounds.
56 - English
Power (Watt)
200
400
600
800
1000
1200
1400
1600
1800
2000
Right heating zone (3)
Level
L01
L02
L03
L04*
L05
L06
L07
–
–
–
(7) of the desired heating zone (1, 3) to
Power (Watt)
200
400
600
800
1000
1250
1500
–
–
–
Advertenties
Hoofdstukken
Inhoudsopgave
Probleemoplossen
