Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
• If you select power level, select "Power" using
the "Function" key. Now you can set the power
required by means of the arrow keys,
• If you select temperature control, select "Temp"
using the "Function" key. Now you can set the re-
quired temperature by means of the arrow keys
between 60°C and 240°C in 20°C increments.
• After setting the power level or temperature, you
can optionally to set the timer. This timer switch-
es the appliance off after the programmed time
has been reached. You do this by pressing the
"Function" key once more after setting the power
level or temperature, and selecting "Timer". Now
you can set the required time in 5 minute incre-
ments. The maximum time is 180 minutes.
Cleaning and maintenance
• Always remove the plug from the socket before
cleaning the appliance and wait until the unit is
cooled down completely.
• Beware: Never immerse the appliance in water
or any other liquid!
• Clean the outside of the appliance with a damp
cloth (water with mild detergent).
Failure codes
Code
Failure
E01
Overheating of the electro-
nics
E02
The pan on the glass plate is
overheating
E03
Mains voltage too high or
too low.
In all other cases please contact your supplier. In case of any doubt, always contact your supplier!
• Use only pans that are suitable for induction and
have not been used before on other sources of
heat.
• The display will go off and the lights next to "Pow-
er", "Temp" and "Timer" will go off. The light next
to the "ON/OFF" will stay lit.
• If you do not use the appliance for an extended
period, remove the plug from the wall-mounted
electrical socket and remove the pans from the
appliance.
• ATTENTION! Allow the appliance to cool off be-
fore you touch it. The glass plate is very hot after
use.
• Never use aggressive cleaning agents or abra-
sives. Do not use any sharp or pointed objects.
Do not use petrol or solvents! Clean with a damp
cloth and detergent if necessary.
• Clean the ventilation slots (if applicable) with the
vacuum cleaner.
• Clean the glass cooking top every time after you
use it to prevent any residues from burning onto
the glass cooking top.
Possible cause
Insufficient ventilation
Empty or overheated pan or
pan with too hot oil
Fault in the mains
• Pans with a sandwich bottom that have been
used on gas, can warp and are not suitable any-
more for electric, ceramic, halogen or induction
cooking.
Possible solution
Check ventilation slots on
dust and make sure there
is enough space around the
appliance.
Switch the appliance off, let it
cool off and switch it on again
Remove the plug from the
wall-mounted electrical
socket, let it cool off and plug
it back in
Electrical installation is not
in order, have an electrician
check it
EN
7
Advertenties
Inhoudsopgave
