Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Continuity tester:
less than 75 Ohm, test voltage 3.0 V max.,
Response time: 500 ms
Capacity
200 µF
measurement
Measurement frequency approx. 42 Hz
Frequency
2 kHz
measurement 20 kHz
40 kHz
Minimum input voltage (sensitivity) 2Vrms
Minimum pulse width > 7.5 µs
Mark-to-space ratio; between > 30% and < 70%
Maximum input quantities, overload protection
Voltage measurement . . . .: 500 VDC or 350 VAC rms max. for 15
Current measurement . . . .: 1000 A or 1200 A max., for 60s max.
Resistance measurement .: 20 MOhm max., overload protection
Continuity test . . . . . . . . . .: Overload protection 500 VDC or VAC
Diode test . . . . . . . . . . . . .: Overload protection 500 VDC or VAC
Capacity measurement . . .: 200 µF max., overload protection 500
Frequency measurement . .: 40 kHz max., overload protection 500
Exceeding the maximum permissible input values
or an overloading under adverse conditions will
lead to damage to the measuring instrument or to
the life of the user being endangered.
Pince à courant - VC 602
All manuals and user guides at all-guides.com
Acoustic signal at resistances
±(3.5%+5dgts)
±(0.5%+3dgts)
±(0.5%+3dgts)
±(0.5%+3dgts)
s max. in the 200 mV DC voltage mea-
suring range;
1000 VDC or 750 VAC rms max. in the
remaining ranges and AC voltage ranges
500 VDC or VAC rms
rms
rms
VDC or VAC rms
VDC or VAC rms
100 nF (=0.1µF)
1 Hz
10 Hz
100 Hz
47
Advertenties
Hoofdstukken
Inhoudsopgave
