Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
■
For the replacement line, use only nylon filament line of
the diameter described in the specification table of this
manual.
■
After extending the new cutter line, always return the
product to its normal operating position before starting.
■
After each use, clean the product with a soft, dry cloth.
Any part that is damaged should be properly repaired or
replaced by an authorised service centre.
■
Check all nuts, bolts, and screws before each use and
at frequent intervals for proper tightness to ensure that
the product is in safe working condition. Any part that is
damaged should be properly repaired or replaced by an
authorised service centre.
■
Bring the product to an authorised service centre to
replace damaged or unreadable labels.
KNOW YOUR PRODUCT
See page 119.
1. Rear handle
2. Lock-out trigger
3. On/Off switch
4. Bike handle
5. Shaft coupling
6. Lower drive shaft
7. Nut
8. Cut-off blade
9. Metal cover
10. Grass deflector
11. Flange washer
12. Harness
13. Cutting line
14. Bump head
15. Spool retainer
16. Spool
17. Eyelet
18. Blade guard
19. TRI-ARC blade
20. Blade protector
21. Operator's manual
22. Screw
23. Charger
24. Battery pack
25. Lock pin
26. Hex key
27. Combination wrench
SYMBOLS
Safety alert
Read and understand all instructions
before operating the product. Follow all
warnings and safety instructions.
Wear eye, ear, and head protection.
Wear non-slip safety footwear when
using the product.
Wear non-slip, heavy duty gloves.
6
Original Instructions
Do not expose the product to rain or
damp conditions.
The product is not intended for use
with a toothed saw type blade.
Rotational direction and maximum
speed of the shaft for the cutting
attachment.
Beware of thrown or fl ying objects.
Keep all bystanders a safe distance
away from the product.
Beware of thrown or fl ying objects.
Keep all bystanders, especially
children and pets, at least 15 m away
from the operating area.
Keep hands away from cut-off blade
Beware of blade thrust
TRI-ARC blade is appropriate for this
product and is suited for cutting pulpy
weeds and vine.
Guaranteed sound power level for
107
brushcutter
Guaranteed sound power level for line
96
trimmer
Do not dispose of waste batteries,
waste electrical and electronic
equipment as unsorted municipal
waste. Waste batteries and waste
electrical and electronic equipment
must be collected separately. Waste
batteries, waste accumulators, and
light sources have to be removed
from the equipment. Check with your
local authority or retailer for recycling
advice and collection point. According
to local regulations, retailers may
have an obligation to take back waste
batteries and waste electrical and
electronic equipment free of charge.
Your contribution to the reuse and
recycling of waste batteries and waste
electrical and electronic equipment
helps to reduce the demand of raw
materials. Waste batteries, in particular
containing lithium, and waste electrical
and electronic equipment contain
valuable and recyclable materials,
which can adversely impact the
environment and the human health if
not disposed of in an environmentally
compatible manner. Delete personal
data from waste equipment, if any.
Advertenties
Inhoudsopgave
