Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
●
before checking, cleaning, and working on the
product
●
before changing accessories
●
before installing the blade
●
before removing the blade
●
before leaving the product unattended
●
after striking a foreign object
●
whenever performing maintenance
●
whenever the product starts to vibrate abnormally
■
The small blade fitted to the grass deflector is designed
to trim the new extended line to the correct length for
safe and optimum performance. It is very sharp; do not
touch it, particularly when cleaning the product.
■
Always ensure that ventilation openings are kept clear
of debris.
■
Make sure that the cutting head attachment is properly
installed and securely fastened.
■
Make sure that all guards, deflectors, and handles are
properly and securely attached.
■
Do not modify the product in any way. This may increase
the risk of injury to yourself or others.
■
Use only the manufacturer's replacement cutting line.
Do not use any other cutting attachment.
■
Immediately turn off the product in the event of accident
or breakdown. Do not operate the product again until it
has been fully checked by an authorised service centre.
BRUSHCUTTER SAFETY WARNINGS
■
In addition to the above rules, these additional
instructions are appropriate when using the product in
brushcutter mode.
■
Use heavy-duty gloves while installing or removing
blades, they have sharp edges.
■
Do not attempt to touch or stop the blade when it is
rotating.
■
A moving blade can cause severe injury. Maintain proper
control of the product with both hands until the blade has
completely stopped rotating.
■
Replace any blade that has been damaged. Always
make sure that the blade is installed correctly and
securely fastened before each use.
■
Use only the manufacturer's replacement TRI-ARC
blade. Do not use any other cutting attachment.
■
Never cut any material over 13 mm diameter.
■
The brushcutter is fitted with a harness. Carefully adjust
the harness to fit comfortably and help support the
weight of the product at your right side.
■
Identify the quick-release mechanism and practice using
it before you start using the product. Its correct use may
prevent serious injury in case of an emergency. Never
wear additional clothing over the harness or otherwise
that restrict access to the quick release mechanism.
■
Cover the blade with the blade protector before storing
the product, or during transportation. Always remove the
blade protector before using the product. If not removed,
the blade protector could become a thrown object as the
blade begins to turn.
■
Exercise extreme caution when using the blade with the
product. Blade thrust is the reaction that may occur when
the spinning blade contacts anything it cannot cut. This
contact may cause the blade to stop for an instant, and
suddenly "thrust" the product away from the object that
was hit. This reaction can be violent enough to cause the
operator to lose control of the product. Blade thrust may
occur without warning if the blade snags, stalls, or binds.
This is more likely to occur in areas where it is difficult to
see the material being cut.
■
For cutting ease and safety, approach the weeds
being cut from the right to the left. In the event that
an unexpected object or woody stock is encountered,
this practice could minimise the blade thrust reaction.
Both hands must be used at all times to control the
product.
■
Injuries may be caused, or aggravated, by prolonged use
of the product. When using any product for prolonged
periods, ensure to take regular breaks.
ADDITIONAL BATTERY SAFETY WARNINGS
WARNING! To reduce the risk of fi re, personal injury,
and product damage due to a short circuit, never immerse
your tool, battery pack, or charger in fl uid or allow a fl uid
to fl ow inside them. Corrosive or conductive fl uids, such
as seawater, certain industrial chemicals, and bleach or
bleach-containing products, etc., can cause a short circuit.
TRANSPORTATION AND STORAGE
■
Turn off the product, and allow it to cool down before
storing or transporting.
■
Remove all foreign materials from the product. Store it in
a cool, dry, and well-ventilated place that is inaccessible
to children. Keep the product away from corrosive
agents, such as garden chemicals and de-icing salts. Do
not store the product outdoors.
■
If a cutting blade is fitted, cover it with the blade protector.
■
Always remove the battery pack from the product before
storing.
■
For transportation in vehicles, secure the product
against movement or falling to prevent injury to persons
or damage to the product.
TRANSPORTING LITHIUM BATTERIES
Transport the battery in accordance with local and national
provisions and regulations.
Follow all special requirements on packaging and labelling
when transporting batteries by a third party. Ensure that
no batteries can come in contact with other batteries
or conductive materials while in transport by protecting
exposed connectors with insulating, non-conductive caps or
tape. Do not transport batteries that are cracked or leaking.
Check with the forwarding company for further advice.
MAINTENANCE
■
Use only original manufacturer's replacement parts,
accessories, and attachments. Failure to do so can cause
possible injury, can contribute to poor performance, and
may void your warranty.
■
Servicing requires extreme care and knowledge
and should be performed only by a qualified service
technician. Have the product serviced by an authorised
service centre only.
■
Turn off the product and remove the battery pack before
conducting any maintenance or cleaning work.
■
You may make adjustments and repairs described in this
manual. For other repairs, contact the authorised service
agent.
5
Original Instructions
EN
FR
DE
ES
IT
NL
PT
DA
SV
FI
NO
RU
PL
CS
HU
RO
LV
LT
ET
HR
SL
SK
BG
UK
TR
Advertenties
Inhoudsopgave
