Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Safety, performance, and dependability have been given top
priority in the design of your cordless brushcutter and line trimmer.
INTENDED USE
The cordless brushcutter and line trimmer is intended to
be used only by adults who have read and understood
the instructions and warnings in this manual and can be
considered responsible for their actions. The product is
intended only for use outdoors in a well-ventilated area.
For safety reasons, the product must be adequately
controlled by a two-handed operation.
The product fi tted with the line trimmer head (and
appropriate guard) is intended for cutting long grass, pulpy
weed, and similar vegetation at or about ground level. When
fi tted with the TRI-ARC blade (and appropriate guard), it can
also cut bushes. The product is not designed to be fi tted
with a saw blade.
The cutting plane should be approximately parallel to the
ground surface. The product should not be used to cut or
trim hedges, bushes, or other vegetation where the cutting
plane is not parallel to the ground surface.
Use the product for cutting grass and light weeds only. Do
not use the product for any other purpose.
GENERAL SAFETY WARNINGS
WARNING! When using the product, the safety rules
must be followed. For your own safety and that of bystanders,
read these instructions before operating the product.
WARNING! The product is not intended to be used by
children or persons with reduced physical, mental or sensory
capabilities. Children should be adequately supervised to
ensure they do not play with the product.
WARNING! Never use cutting means or attachments,
that are not specifi ed by RYOBI in this manual. This includes
the use of metal multi-piece pivoting chains and fl ail-blades.
These items are known to break up during use and present
high risk of serious injury to the operator or bystanders.
WARNING! Inspection after dropping or other impacts:
Thoroughly inspect the product and identify any problems or
damage to it. Any part that is damaged should be properly
repaired or replaced by an authorised service centre.
TRAINING
■
Never allow children or people unfamiliar with these
instructions to use the product. Local regulations may
restrict the age of the operator.
■
Read the instructions carefully. Be familiar with all
controls and the proper use of the product.
■
Keep bystanders, children, and pets 15 m away from the
area of operation. Turn off the product if anyone enters
the area.
■
Do not use the product while tired, ill, or under the
influence of drugs, alcohol, or medication.
■
Keep in mind that the operator or user is responsible for
accidents or hazards occurring to other people or their
property.
PREPARATION
■
Wear full eye and hearing protection while operating the
product. If working in an area where there is a risk of
falling objects, head protection must be worn.
■
Hearing protection may restrict the operator's ability
to hear warning sounds. Pay particular attention to
potential hazards around and inside the working area.
■
Wear heavy, long trousers, boots, and gloves. Do not
wear loose-fitting clothing, short trousers, jewellery of
any kind, or use with bare feet.
■
Secure long hair so it is above shoulder level to prevent
entanglement in moving parts.
■
Before use and after any impact, check that there are
no damaged parts. A defective switch or any part that
is damaged or worn out should be properly repaired or
replaced by an authorised service facility.
■
Make sure that the cutting attachment is properly
installed and securely fastened.
■
Never operate the product unless all guards, deflectors,
and handles are properly and securely attached.
■
Consider the environment in which you are working.
Keep the working area free from wires, sticks, stones
and debris, which if struck by the cutter, can become
thrown objects.
GENERAL PRODUCT SAFETY WARNINGS
WARNING! Read all safety warnings and all
instructions. Failure to follow the warnings and instructions
may result in electric shock, fi re and/or serious injury. Save
all warnings and instruction for future reference.
The term "power tool" in the warnings refers to your mains-
operated (corded) product or battery-operated (cordless)
product.
WORK AREA SAFETY
■
Keep work area clean and well lit. Cluttered or dark
areas invite accidents.
■
Do
not
operate
power
atmospheres, such as in the presence of flammable
liquids, gases or dust. Power tools create sparks
which may ignite the dust or fumes.
■
Keep children and bystanders away while operating
a power tool. Distractions can cause you to lose control.
ELECTRICAL SAFETY
■
Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any adapter
plugs
with
earthed
Unmodified plugs and matching outlets will reduce risk
of electric shock.
■
Avoid body contact with earthed or grounded
surfaces, such as pipes, radiators, ranges and
refrigerators. There is an increased risk of electric
shock if your body is earthed or grounded
■
Do not expose power tools to rain or wet conditions.
Water entering a power tool will increase the risk of
electric shock.
■
Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool. Keep
cord away from heat, oil, sharp edges or moving
parts. Damaged or entangled cords increase the risk of
electric shock.
■
When operating a power tool outdoors, use an
extension cord suitable for outdoor use. Use of a
cord suitable for outdoor use reduces the risk of electric
shock.
tools
in
explosive
(grounded)
power
tools.
3
Original Instructions
EN
FR
DE
ES
IT
NL
PT
DA
SV
FI
NO
RU
PL
CS
HU
RO
LV
LT
ET
HR
SL
SK
BG
UK
TR
Advertenties
Inhoudsopgave
