Installation - Amica EB Series Gebruikershandleiding
Verberg thumbnails
Zie ook voor EB Series:
- Gebruikershandleiding (68 pagina's) ,
- Gebruikershandleiding (52 pagina's)
Advertenties
Beschikbare talen
Beschikbare talen
INSTALLATION
Installing the oven
The kitchen area should be dry and aired
and equipped with efficient ventillation.
When installing the oven, easy access to
all control elements should be ensured.
This is a Y–type design built–in oven,
which means that its back wall and one
side wall can be placed next to a high
piece of furniture or a wall. Coating or
veneer used on fitted furniture must be
applied with a heat–resistant adhesive
(100°C). This prevents surface deforma-
tion or detachment of the coating.
Hoods should be installed according to
the manufacturer's instructions.
Make an opening with the dimensions
given in the diagram for the oven to be
fitted.
Make sure the mains plug is disconnected
and then connect the oven to the mains
supply.
Insert the oven completely into the open-
ing without allowing the four screws in the
places shown in the diagram to fall out.
All manuals and user guides at all-guides.com
9
Advertenties
Hoofdstukken
