Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Problem
8.2 Closing the door
1. Clean the door gaskets.
9. INSTALLATION
9.1 Positioning
This appliance can be installed in a dry,
well ventilated indoor where the ambient
temperature corresponds to the climate
class indicated on the rating plate of the
appliance:
Climate
class
SN
N
ST
T
If the advice does not lead to
the desired result, call the
nearest brand-mark service.
WARNING!
Refer to Safety chapters.
Ambient temperature
+10°C to + 32°C
+16°C to + 32°C
+16°C to + 38°C
+16°C to + 43°C
Some functional problems
might occur for some types
of models when operating
outside of that range. The
correct operation can only be
guaranteed within the
specified temperature range.
If you have any doubts
regarding where to install the
appliance, please turn to the
vendor, to our customer
service or to the nearest
Service Centre
Possible cause
There is no cold air circu-
lation in the appliance.
2. If necessary, adjust the door. Refer to
3. If necessary, replace the defective
9.2 Location
The appliance should be installed well
away from sources of heat such as
radiators, boilers, direct sunlight etc.
Ensure that air can circulate freely around
the back of the cabinet. To ensure best
performance, if the appliance is positioned
below an overhanging wall unit, the
minimum distance between the top of the
cabinet and the wall unit must be at least
100 mm . Ideally, however, the appliance
should not be positioned below
overhanging wall units. Accurate levelling
is ensured by one or more adjustable feet
at the base of the cabinet.
Solution
Make sure that there is cold
air circulation in the appli-
ance.
"Installation".
door gaskets. Contact the Service
Center.
It must be possible to
disconnect the appliance
from the mains power supply;
the plug must therefore be
easily accessible after
installation.
ENGLISH
31
Advertenties
Hoofdstukken
Inhoudsopgave
Probleemoplossen
