Remember The Settings Function; Sensor Lock For 20 Seconds; General Settings Of The Hob - Amica KMI Series Gebruikershandleiding
Verberg thumbnails
Zie ook voor KMI Series:
- Gebruikershandleiding (68 pagina's) ,
- Gebruikershandleiding (56 pagina's)
Advertenties
Beschikbare talen
Beschikbare talen
OPERATION
Remember the settings function
If the hob was accidentally switched off by pressing the on/off sensor (1), all the settings
can be restored using the remember settings function. After switching off the control panel
by pressing the on/off sensor (1), you have 6 seconds to switch the hob back on, and the
settings will be restored. Remember function can be used if at least one cooking zone was
active (heat level > 0).
Sensor lock for 20 seconds
To enable the lock function briefly press the on/off sensor (1).
you can enable the lock by pressing the „
sensor (2).
While the lock is active, the display shows the message "Time limit active" and the remain-
ing time.
General settings of the hob
You can change the general settings of the hob. These settings are saved even after switch-
ing off the hob. You can change the following settings:
• Language selection
• Display brightness
• Volume
Language selection
To change the language settings, press the multifunction sensor (3) and select the "globe"
symbol
. Now the language menu appears. The currently selected language is highlight-
ed. To change the language, press the indicated place on the heat setting selection sensor
field (2). The menu is left automatically.
Display brightness
To change the brightness settings, press the multifunction sensor (3) and select the "sun"
symbol
. Now the brightness menu appears. To change the brightness level, simply slide
your finger across the heat setting selection sensor (2), the brightness level increases from
left to right. To exit the menu just press the multifunction sensor (3) again.
Volume control
To change the volume settings, press the multifunction sensor (3) and select the "speaker"
symbol
. Now the volume menu appears. To change the volume level, simply slide your
finger across the heat setting selection sensor (2), volume level increases from left to right.
To exit the menu just press the multifunction sensor (3) again.
All manuals and user guides at all-guides.com
The menu appears
symbol on the heat setting selection
"
33
, where
Advertenties
Hoofdstukken
