Download Inhoudsopgave Inhoud Print deze pagina

First Use; Set The Water Softener - Pelgrim GVW557RVS Gebruiksaanwijzing

Inhoudsopgave

Advertenties

Beschikbare talen

Beschikbare talen

68
Always remember that when performing
the following operations:
– selecting a washing programme,
– setting the water softener level,
– activating/deactivating the rinse aid,
– activating/deactivating the audible
signals,
the appliance MUST be in setting mode.
Press the On/Off button; if a programme but-
ton light comes on, the last performed or se-
lected programme is still set. In this case, to
return to setting mode, the programme has
to be cancelled.
To cancel a set programme or a
programme in progress
Simultaneously press and hold the two func-
tion buttons B and C until all the programme
button lights come on. The programme has
been cancelled and the machine is now in
setting mode.
Audible signals
Audible signals help to indicate which oper-
ations the dishwasher is performing:
– adjustment of the water softener,
– end of the washing programme,
– intervention of an alarm due to malfunction
of the machine.

First use

Before using your dishwasher for the first
time:
• Ensure that the electrical and water con-
nections comply with the installation in-
structions
• Remove all packaging from inside the ap-
pliance
• Set the water softener level

Set the water softener

The dishwasher is equipped with a water
softener designed to remove minerals and
salts from the water supply, which would
have a detrimental or adverse effect on the
operation of the appliance.
The higher the content of these minerals and
salts, the harder your water is. Water hard-
ness is measured in equivalent scales, Ger-
man degrees (dH°), French degrees (°TH)
and mmol/l (millimol per litre - international
unit for the hardness of water).
All manuals and user guides at all-guidesbox.com
Deactivation/activation of the audible
signals
1. Press the On/Off button. The dishwasher
2. Simultaneously press and hold function
3. Press function button C . The lights of
4. To deactivate the audible signals, press
5. To memorize the operation, switch off
• Pour 1 litre of water into the salt container
and then fill with dishwasher salt
• Fill the rinse aid dispenser
The softener should be adjusted according
to the hardness of the water in your area.
Your local Water Authority can advise you on
the hardness of the water in your area.
Factory setting: audible signals active
It is possible to deactivate the audible
signals.
must be in setting mode.
buttons B and C until the lights of function
buttons A , B and C start flashing.
function buttons A and B go off while the
light of function button C goes on flash-
ing. Simultaneously the End indicator
light comes on.
The audible signals are active.
function button C again. The End indica-
tor light goes off.
The audible signals are deactivated.
the dishwasher by pressing the On/Off
button.
To activate again the audible signals fol-
low the above operations until the End
indicator light comes on.
If you want to use combi detergent
tablets such as: '3 in 1', '4 in 1', '5 in
1' etc. follow the instructions given
in 'Use of detergent'.
The water softener must be set in two
ways: manually, using the water hard-
ness dial and electronically.

Advertenties

Inhoudsopgave
loading

Inhoudsopgave