Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
74
The water softener must be set in two
ways: manually, using the water hard-
ness dial and electronically.
Water hardness
°dH
°TH
51 - 70
91 - 125
43 - 50
76 - 90
37 - 42
65 - 75
29 - 36
51 - 64
23 - 28
40 - 50
19 - 22
33 - 39
15 - 18
26 - 32
11 - 14
19 - 25
4 - 10
7 - 18
< 4
< 7
Setting manually
The dishwasher is factory set at position
2.
1. Open the dishwasher door.
2. Remove the lower basket from the dish-
washer.
3. Turn the water hardness dial to position
1 or 2 (see chart).
4. Replace the lower basket.
Setting electronically
The dishwasher is factory set at level 5.
1. Press the On/Off button. The dishwasher
must be in setting mode.
2. Simultaneously press and hold function
buttons B and C , until the lights of func-
tion buttons A , B and C start flashing.
3. Press function button A , the lights of
function buttons B and C go off while the
Use of dishwasher salt
Warning!
All manuals and user guides at all-guides.com
Adjusting the water hardness setting
mmol/l
manually
9,1 - 12,5
7,6 - 9,0
6,5 - 7,5
5,1 - 6,4
4,0 - 5,0
3,3 - 3,9
2,6 - 3,2
1,9 - 2,5
0,7 - 1,8
< 0,7
4. To change the level, press function but-
5. To memorize the operation, switch off the
electronically
2
level 10
2
level 9
2
level 8
2
level 7
2
level 6
2
level 5
1
level 4
1
level 3
1
level 2
1
level 1
light of function button A continues to
flash. Simultaneously the End indicator
light starts to flash and a sequence of in-
termittent audible signals are heard.
The current level is indicated by the num-
ber of flashes of the End indicator light
together with a sequence of intermittent
audible signals with a pause of a few sec-
onds.
Examples:
5 flashes / 5 intermittent audible signals -
pause - 5 flashes / 5 intermittent audible
signals - pause, etc. = level 5
6 flashes / 6 intermittent audible signals -
pause - 6 flashes / 6 intermittent audible
signals - pause, etc. = level 6
ton A . Each time the button is pressed
the level changes. (For the selection of the
new level see the chart).
Examples: If the current level is 5, by
pressing function button A once, level 6
is selected.
If the current level is 10, by pressing func-
tion button A once, level 1 is selected.
dishwasher by pressing the On/Off but-
ton.
Use of
salt
yes
yes
yes
yes
yes
yes
yes
yes
yes
no
Advertenties
Hoofdstukken
Inhoudsopgave
