Setting The Child Lock Function; Releasing The Child Lock Function To Cook Only - Amica SHI Series Gebruikershandleiding
Verberg thumbnails
Zie ook voor SHI Series:
- Gebruikershandleiding (72 pagina's) ,
- Gebruikershandleiding (72 pagina's)
Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
OPERATION
Booster function control
Two cooking zones arranged vertically form a pair.
If activating Booster function causes the overall power limit of a pair to be
exceeded, the heat setting of the other cooking zone in a pair will be automati-
cally reduced.
The child lock function
The Child Lock function protects the appliance from inadvertent operation by children. The
appliance can be operated once the child lock function has been released.
Setting the child lock function
The child lock function can only be set when the appliance is switched on and none of the
cooking zones or timer is in operation (all displays show „0" and dots are a flashing).
To set the child lock function switch the appliance on using the on/off sensor field (1), simul-
taneously touch the front right cooking zone selection sensor field (5) and sensor field (4)
and once again touch the front right cooking zone selection sensor field (5). All displays will
show the letter „L" (Locked), which indicates that the Child Lock function has been set. If
cooking zones are still hot, the display will alternate between showing the letters „L" and „H".
The Child Lock function must be set within 10 seconds and no sensor fields
other than those described above must be touched. Otherwise the Child Lock
function will not be set.
The Child Lock function remains set until it is released even after the appliance
has been switched off and then switched on again. Disconnecting the appliance
from electrical mains does not release the child lock.
Releasing the child lock function to cook only
Switch the appliance on using the on/off sensor field (1); all displays will show the letter „L"
(Locked). To release the Child Lock function simultaneously touch the front right cooking zone
selection sensor field (5) and sensor field (4). The letters „L" shown on the cooking zone displays
will be replaced with „0." and a flashing dot. Cooking zones can now be operated. (For details
please see section „Selecting the cooking zone heat setting").
All manuals and user guides at all-guides.com
22
Advertenties
Hoofdstukken
Inhoudsopgave
