OPERATION
Switching off cooking zones
● A given cooking zone must be active. Heat setting display is bright.
● To switch off a cooking zone touch the on/off sensor field or touch the lower heat setting
sensor field „-" (4) to reduce the heat setting to „0".
Switching off the appliance
● The hob operates when at least one cooking zone is on.
● To switch off the appliance touch the on/off sensor (1).
If the cooking zone is still hot, the relevant display (3) will show the letter „H" to indicate
residual heat.
Booster function „P"
The Booster Function increases the nominal power of the
Ø 210 mm cooking zone from 2300W to 3000W,
Ø 180 mm cooking zone from 1400W to 2000W.
Ø 160 mm cooking zone from 1200W to 1400W.
In order to activate the Booster function, select the cooking zone, set the heat setting to „9"
and then touch the „+" (2) sensor field again. The letter „P" will be shown on the display.
To deactivate the Booster function, touch the „-" (4) sensor field to reduce the heat setting or
lift the cookware from the cooking zone.
For Ø 210, Ø 180 mm cooking zone, operation of the Booster function is limited
to 5 minutes. Once the Booster function is automatically deactivated, the cooking
zone continues to operate at its nominal power.
The Booster function can be reactivated, provided the appliance electronic
circuits and induction coils are not overheated. When the pot is lifted from the
cooking zone when the Booster function is in operation, it remains active and
the countdown continues.
When the appliance electronic circuits or induction coils overheat when the
Booster function is in operation, it is automatically deactivated. The cooking zone
continues to operate at its nominal power.
All manuals and user guides at all-guides.com
21