Pan Detector - Amica SHI Series Gebruikershandleiding
Verberg thumbnails
Zie ook voor SHI Series:
- Gebruikershandleiding (72 pagina's) ,
- Gebruikershandleiding (72 pagina's)
Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
OPERATION
Pan detector
Pan detector is installed in induction hobs. Pan detector starts heating automatically when
a pan is detected on a cooking zone and stops heating when it is removed. This helps save
electricity.
● When an suitable pan is placed on a cooking zone, the display shows the heat setting.
● Induction requires the use of suitable cookware with ferromagnetic base (see Table).
If a pan is not placed on a cooking zone or the pan is unsuitable, the
displayed. The cooking zone will not operate. If a pan is not detected within 10 minutes,
the cooking zone will be switched off.
Switch off the cooking zone using the touch control sensor field rather than by remo-
ving the pan.
Pan detector does not operate as the on/off sensor.
The induction hob is equipped with electronic touch control sensor fields, which are operated
by touching the marked area with a finger.
Each time a sensor field is touched, an acoustic signal can be heard.
When switching the appliance on or off or changing the heat setting, attention should be
paid that only one sensor field at a time is touched. When two or more sensor fields are
touched at the same time (except timer and child lock), the appliance ignores the control
signals and may trigger a fault indication if sensor fields are touched for a long time.
When you finish cooking switch off the cooking zone using touch control sensor fields
and do not rely solely on the pan detector.
All manuals and user guides at all-guides.com
17
symbol is
Advertenties
Hoofdstukken
Inhoudsopgave
