Operation
USB/Memory Card Operation
The device is equipped with a USB interface and memory card reader for SD/MMC cards.
MP3 files stored on these media can be played back.
Do not connect any MP3 player to the USB interface if it is battery-operated.
The USB interface power supply may charge the inserted batteries and cause heating and
explosion of the batteries.
USB media and USB hard discs of up to 32 GB and a power intake of no more than 500 mA can be
connected to the USB interface.
Only USB storage media can be operated via the USB interface. MP3 players with USB connection will
usually switch to PC mode when connected here. Music files cannot be played in this mode. However,
you can always connect an MP3 player's audio output to the AUX IN (24) connection.
SD/MMC cards and SDHC cards at up to 16 GB are supported.
The media must be FAT 16 or FAT 32 formatted.
Due to the great diversity of devices with USB and SD/MMC card interfaces and their sometimes very
manufacturer-specific functions, it cannot be ensured that all media will be recognised and all operation
options are present in connection with this device.
If the storage medium is not recognised, remove it again and re-connect it.
•
Connect your USB storage medium to USB interface (25).
•
If you are using a memory card, connect it to the memory card reader (14).
•
The device automatically switches to the corresponding input and commences playback.
•
The medium last inserted is selected automatically.
74
All manuals and user guides at all-guides.com
Operating Instructions
English