Download Print deze pagina

Renkforce BSD-3023 Gebruiksaanwijzing pagina 62

Advertenties

Beschikbare talen

Beschikbare talen

Electrical Connection
Insertion/Replacement of the Remote Control Battery
Observe correct polarity when inserting battery.
Do not let batteries lying around openly; there is a danger that they are swallowed by children
or pets. If swallowed, see a doctor immediately.
Leaking or damaged batteries may cause caustic burns when touching skin. Therefore, use
suitable protective gloves in this case.
Ensure that the battery is not short-circuited or thrown into fire. It also must not be recharged.
There is a danger of explosion.
Remove the battery if you do not use it for an extended period of time.
Take the remote control from the steering wheel holder as described above.
Slide open the battery compartment lid at the rear of the remote control and remove it.
Put in a new 3V lithium button cell CR2025 in the correct polarity. The positive pole of the battery must point
upwards for this.
Close the battery compartment again. The latching tab must latch audibly.
Attach the remote control in the steering wheel holder again as described above.
If the remote control no longer works properly, the battery is discharged and must be replaced with a new battery
of the same type.
The battery is changed as described above.
Replace the discharged battery with a new battery of the same type.
62
All manuals and user guides at all-guides.com
Operating Instructions
English

Advertenties

loading

Deze handleiding is ook geschikt voor:

37 35 21