Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Automatic time limit
If a hotplate has been switched on for a long time without the
setting being changed, the automatic time limit is activated.
The hotplate stops heating.
indicator flash alternately on the hotplate display.
Keep warm function
The Keep warm function is suitable for melting chocolate or
butter and for warming food and ovenware.
Switching on the Keep warm function
Select the hotplate.
1.
Touch the L symbol.
2.
Control panel pause
If you wipe over the control panel while the hob is switched on,
settings may be altered.
To prevent this from happening, your hob has a control panel
pause function. Touch the
The indicator light above the
Energy consumption display
You can use this function to have the total energy consumption
between switching the hob on and off displayed.
Once switched off, the energy consumption in kilowatt hours
(e.g. 1.08 kWh) is displayed for 10 seconds
The accuracy of the display depends, amongst other things, on
the voltage quality of the power supply.
Basic settings
Your appliance has various basic settings. You can adapt these
settings to suit your own needs.
Display
Function
Automatic childproof lock
™‚
‹
Switched off.*
Switched on.
‚
*Basic setting
and the
/
residual heat
" ‰
•
œ
symbol. An audible signal sounds.
"
symbol lights up. The control
"
The display goes out when you touch any control. You can
make new settings.
When the time limit is activated depends on the heat setting
selected (1 to 10 hours).
appears in the heat setting display. The Keep warm function
–
is switched on.
Switching off the Keep warm function
Select the hotplate and touch the L symbol.
heat setting display.
The hotplate switches off after 10 seconds and the residual
heat indicator appears.
panel is locked for 30 seconds. You can now wipe over the
control panel without altering any settings.
Note: The main switch is excluded from the control panel
pause function. You can switch off the hob at any time.
The display has not been activated. You can find out how to
activate the display in the Basic settings section.
appears in the
‹
33
Advertenties
Hoofdstukken
Inhoudsopgave
