Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Temperature mode symbols ( ,
Automatic mode symbol
Ventilation level (0,1, 2, 3)
Light Diode Indication:
1. No LED signal indication on the panel – unit has been switched off.
2. LED shines steady green and text message is shown – unit is switched on.
3. Automatic mode symbol is shown on the panel, while green LED shines – unit is operating in automatic
mode according to weekly schedule.
4. LED blinks red and green and text message is shown – see 7.9 chapter.
5. LED shines steady red and text message is shown – emergency unit shut down (see 7.9 chapter).
6. Nothing is showing on the control panel - unit does not have electric power supply.
7.4. Parameters Review
Main parameters are shown in the start-up window (7.3. Picture). To view other parameters (temperature value or
air flow indication) touch
*
Exhaust air temperature and flow are not displayed for OTK units.
UAB AMALVA we reserve the right to make changes without prior notice
Control Panel Start-Up Window
)
Setting temperature (+15...30 °C)
Supply air temperature
,
buttons till corresponding window appears:
The 3rd window is provided only in the units with EC fans. There is pos-
sibility to change air flow indication from m
do is to press
button while being in an air flow indication window and
holding this button go "up" and "down" with
the right measures.
The 4th window is provided only in the units with EC fans. Depending on
the type of mounted air quality sensor, the 4th window may appear in one
of three ways. It appears when air quality function is activated (see Air
quality function setting).
Time
Unit operation indication LED
Current season (Winter / Summer)
/h to m
/s or l/s. All you need to
3
3
,
buttons till you select
7.3 Picture
25
Advertenties
Hoofdstukken
Inhoudsopgave
