Download Inhoudsopgave Inhoud Print deze pagina

Fitting The Grease Filters; Troubleshooting; Malfunctions - Junker JD69WD50 Gebruikershandleiding En Installatie-Instructies

Inhoudsopgave

Advertenties

Beschikbare talen

Beschikbare talen

Requirement: The grease filters have been removed.
→ "Removing the grease filter", Page 20
Observe the information regarding the cleaning
1.
agents.
→ "Cleaning products", Page 20
Place the grease filters loosely into the dishwasher.
2.
Do not clean heavily soiled grease filters with
utensils.
Use special grease solvent for stubborn dirt. You
can obtain grease solvents from customer service
or the online shop.
Start the dishwasher.
3.
Select a temperature of no more than 70 °C.
Allow the grease filters to drain.
4.
8.7 Fitting the grease filters
1.
ATTENTION!
Falling grease filters may damage the hob below.
Grip below the grease filter with one hand.
Note: Note the correct position of the grease filter.
Insert the grease filter.

Troubleshooting

9  Troubleshooting
You can rectify minor faults on your appliance yourself.
Read the troubleshooting information before contacting
after-sales service. This will avoid unnecessary costs.
WARNING ‒ Risk of injury!
Improper repairs are dangerous.
Repairs to the appliance should only be carried out
by trained specialist staff.
If the appliance is defective, call Customer Service.
→ "Customer Service", Page 22
9.1 Malfunctions
Fault
The appliance is not
working.
The LED lighting
does not work.
The button illumina-
tion does not work.
Cause and troubleshooting
The mains plug of the power cord is not plugged in.
Connect the appliance to the power supply.
The circuit breaker in the fuse box has tripped.
Check the circuit breaker in the fuse box.
There has been a power cut.
Check whether the lighting in your room or other appliances are working.
Different causes are possible.
Defective LED lights may be replaced by the manufacturer, their customer service or a
qualified technician (electrician) only.
Call
→ "Customer Service", Page 22.
The control unit is faulty.
If this fault recurs, call the after-sales service.
The lock on the grease filter clicks into place.
2.
If the grease filter has been inserted incorrectly,
3.
carefully push the lock forwards, remove the grease
filter and insert it correctly.
WARNING ‒ Risk of electric shock!
Improper repairs are dangerous.
Repairs to the appliance should only be carried out
by trained specialist staff.
Only use genuine spare parts when repairing the
appliance.
If the power cord of this appliance is damaged, it
must be replaced by trained specialist staff.
Troubleshooting en
21

Advertenties

Inhoudsopgave
loading

Deze handleiding is ook geschikt voor:

Jd66wd50

Inhoudsopgave