Download Inhoudsopgave Inhoud Print deze pagina

Avoiding Material Damage; Environmental Protection And Saving Energy; Disposing Of Packaging; Operating Modes - Junker JD69WD50 Gebruikershandleiding En Installatie-Instructies

Inhoudsopgave

Advertenties

Beschikbare talen

Beschikbare talen

WARNING ‒ Risk of fire!
Fatty deposits in the grease filters may catch
fire.
▶ Clean the grease filters regularly.
WARNING ‒ Risk of injury!
Improper repairs are dangerous.
▶ Repairs to the appliance should only be
carried out by trained specialist staff.
▶ If the appliance is defective, call Customer
Service.
→ "Customer Service", Page 22

Avoiding material damage

2  Avoiding material damage
ATTENTION!
Condensate may cause corrosion damage.
To prevent condensation from building up, switch on
the appliance during cooking.
If moisture gets into the controls, this may result in
damage.
Never clean controls with a wet cloth.
Incorrect cleaning damages the surfaces.
Follow the cleaning instructions.
Do not use harsh or abrasive detergents.
Clean stainless steel surfaces in the direction of the
finish only.
Never clean controls with stainless steel cleaners.

Environmental protection and saving energy

3  Environmental protection and saving energy
3.1 Disposing of packaging
The packaging materials are environmentally compat-
ible and can be recycled.
Sort the individual components by type and dispose
of them separately.
3.2 Saving energy
If you follow these instructions, your appliance will use
less power.
Adjust the fan speed to the amount of steam pro-
duced during cooking.
¡ The lower the fan speed, the less energy is con-
sumed.

Operating modes

4  Operating modes
You can use your appliance in air extraction mode or
circulating-air mode.
WARNING ‒ Risk of electric shock!
Penetrating moisture may cause an electric
shock.
▶ Do not use wet sponge cloths.
Condensation that flows back in may damage the ap-
pliance.
The air extraction duct must be installed with a
gradient of at least 1° from the appliance.
If you put incorrect stress on the design elements, they
may break off.
Do not pull design elements.
Do not place objects on the design elements or
hang objects from them.
There is a risk of surface damage if you do not peel off
the protective film.
Remove the protective film from all parts of the ap-
pliance before using for the first time.
Painted surfaces are easily damaged.
Follow the cleaning instructions.
→ "Cleaning the appliance", Page 19
Ensure that the painted surfaces are not scratched.
If cooking produces large amounts of steam, select a
higher fan speed in good time.
¡ The odours are distributed around the room less.
Switch off the lighting if it is no longer required.
¡ When the lighting is switched off, it does not con-
sume any energy.
Clean or replace the filters at regular intervals.
¡ The effectiveness of the filter is retained.
Put the cooking lid on.
¡ The cooking vapours and condensation are re-
duced.
Only use the additional functions if required.
¡ Switching off additional functions reduces power
consumption.
4.1 Air extraction mode
The air which is drawn in is cleaned by the grease fil-
ters and conveyed to the exterior by a pipe system.
Avoiding material damage en
17

Advertenties

Inhoudsopgave
loading

Deze handleiding is ook geschikt voor:

Jd66wd50

Inhoudsopgave