I. Attention Matters
Safety warnings:
1. Do not use means to accelerate the defrosting process or to clean, other than those recommended by the
manufacturer.
2. The appliance shall be stored in a room without continuously operating ignition sources (for example: open
flames, an operating gas appliance or an operating electric heater.)
3. Do not pierce or burn.
4. Be aware that refrigerants may not contain an odour.
5. Appliance shall be installed, operated and stored in a room with a floor area larger than 14m
7. Keep any required ventilation openings clear of obstruction;
8. Servicing shall be performed only as recommended by the manufacturer.
9. The appliance shall be stored in a well-ventilated area where the room size corresponds to the room area
as specified for operation.
10. Any person who is involved with working on or breaking into a refrigerant circuit should hold a current valid
certificate from an industry-accredited assessment authority, which authorizes their competence to handle
refrigerants safely in accordance with an industry recognized assessment specification.
11. Servicing shall only be performed as recommended by the equipment manufacturer. Maintenance and
repair requiring the assistance of other skilled personnel shall be carried out under the supervision of the
person competent in the use of flammable refrigerants.
12. All working procedure that affects safety means shall only be carried by competent persons.
Notes:
*T he air conditioning is only suitable for indoor use, and is not suitable for other applications.
*Follow local grid interconnection rules while installing the air conditioning and ensure that it is properly grounded. If
you have any question on electrical installation, follow the instructions of the manufacturer, and if necessary, ask a
professional electrician to install it.
*Place the appliance in a flat and dry place and keep a distance of above 50cm between the unit and the
surrounding objects or walls.
*After the air conditioning is installed, ensure that the power plug is intact and firmly plugged into the mains power
outlet, and place mains power cable orderly to prevent someone from being tripped or pulling out the plug.
*Do not put any object into the air inlet and outlet of the air conditioning. Keep the air inlet and outlet free from
obstructions.
*When drainage pipes are installed, ensure that the drainage pipes are properly connected, and are not distorted or
bended.
* While adjusting the upper and lower wind-guide strips of the air outlet, pluck it with hands gently to avoid
damaging wind-guide strips.
*When moving the appliance, make sure that it is in an upright position.
*The unit should stay away from gasoline, flammable gas, stoves and other heat sources.
3
2
.