Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
40 www.aeg.com
Problem
Water flows on the
ground.
There is too much
frost and ice.
The temperature in
the appliance is too
high.
The temperature in
the refrigeration is
too high.
The temperature in
the freezer is too
high.
The appliance does
not operate.
The lamp does not
work.
"dEMo" appears on
the display.
As much as the advice does not lead to result, call the nearest brand-mark service.
All manuals and user guides at all-guides.com
Possible cause
The melting water outlet
does not flow in the evap-
orative tray above the
compressor.
Products are not wrapped
properly.
The door is not closed
correctly.
The temperature in the
refrigerator is too low.
The door is not closed
correctly.
The product temperature
is too high.
Many products are stored
at the same time.
There is no cold air circu-
lation in the appliance.
Products are too near to
each other.
The appliance is switched
off.
The mains plug is not
connected to the mains
socket correctly.
The appliance has no
power. There is no volt-
age in the mains socket.
The lamp is in stand-by.
The appliance is in dem-
onstration mode.
Solution
Attach the melting water
outlet to the evaporative
tray.
Wrap the products better.
Refer to "Closing the
door".
Set a higher temperature.
Refer to "Closing the
door".
Let the product tempera-
ture decrease to room
temperature before stor-
age.
Store less products at the
same time.
Make sure that there is
cold air circulation in the
appliance.
Store products so that
there is cold air circulation.
Switch on the appliance.
Connect the mains plug to
the mains socket correctly.
Connect a different electri-
cal appliance to the mains
socket. Contact a qualified
electrician.
Close and open the door.
Keep pressed approxi-
mately 10 sec the OK but-
ton since a long sound of
buzzer is heard and the
display shut off for a short
while: appliance start
works regularly.
Advertenties
Hoofdstukken
Inhoudsopgave
