Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Inspired by life
Adjusting the seat height (3 positions)
1. Remove the seat (see page 29).
2. Remove the battery box; use the handles on
3. Loosen the bolt and adjust the seat column
4. Replace the battery box.
5. Replace the seat.
Dismantling
The mobility scooter can easily be dismantled
for transport or storage (see the 'Transport and
Storage' chapter also).
Warning:
ƒ
Please note:
ƒ
Disassembled mobility scooter
ƒ
ƒ
ƒ
ƒ
1. Remove the seat.
2. Remove the battery box; use the handles on
b
D
3. Pull the unlocking lever (b) on the rear side
4. At the same time, press the handle (D)
Unlocking
Settings and adjustments
both sides for this.
to the required seating height.
Be very careful when dismantling the mobility
scooter. Ensure that your hands and fingers
do not get trapped in the hinge system.
The mobility scooter must be secured for
transport after disassembly at the indicated
places.
The seat can be grabbed from the seat itself
and the back.
The front part of the mobility scooter has grab
places on the bumper and the seat column.
The rear part of the mobility scooter has a
lifting bracket.
During transport, keep the battery separate
and do not replace it.
both sides for this.
of the mobility scooter vertically upwards.
towards the ground.
Z
Y
Determining the position
Y
Z
Assembling
EN18
5. Now, lift the front section (Y) away from the
rear section (Z).
Assembling
1. Tilt the rear section (Z) of the mobility
scooter at an angle of 45 degrees onto the
antitipping wheels.
2.
Attention:
Determine the hookin position accurately
to prevent damage to the body shell.
3. Lift the front section of the mobility scooter
and carefully hook it onto the frame tube of
the lower rear section.
Z
4. Allow the front section to lower gently, until
both sections audibly click together.
5. Place the battery box in the space provided
EN19
Advertenties
Hoofdstukken
Inhoudsopgave
