Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Figure 85
1. Remove the nuts and bolts here.
2. Remove the nuts and bolts here.
8.
Slide the deck out to the right side of the
machine.
Replacing the Grass
Deflector
WARNING
An uncovered discharge opening could allow
the machine to throw objects toward you or
bystanders, resulting in serious injury. Also,
contact with the blade could occur.
Never operate the machine unless you install
a mulch plate, discharge deflector, or grass
collection system.
1.
Remove the locknut, bolt, spring, and spacer
holding the deflector to the pivot brackets
(Figure
86).
2.
Remove the damaged or worn grass deflector
(Figure
86).
All manuals and user guides at all-guidesbox.com
g036866
1. Bolt
2. Spacer
3. Locknut
4. Spring
3.
Place the spacer and the spring onto grass
deflector.
4.
Place 1 J-hook end of the spring behind the
deck edge.
Note:
spring is installed behind the deck edge before
installing the bolt as shown in
5.
Install the bolt and the nut.
6.
Place 1 J-hook end of the spring around the
grass deflector
Important:
to rotate. Lift the deflector up to the full open
position and ensure that it rotates into the
full down position.
61
Figure 86
5. Spring installed
6. Grass deflector
7. J-hook end of spring
Make sure that 1 J-hook end of the
Figure
(Figure
86).
The grass deflector must be able
g015594
86.
Advertenties
Hoofdstukken
Inhoudsopgave
