Download Inhoudsopgave Inhoud Print deze pagina

Engine Maintenance; Engine Safety; Servicing The Air Cleaner - Toro HDX SD 2000 Series Gebruikershandleiding

Zitmaaier van 132 cm
Verberg thumbnails Zie ook voor HDX SD 2000 Series:
Inhoudsopgave

Advertenties

Beschikbare talen

Beschikbare talen

Engine Maintenance

Engine Safety

Keep your hands, feet, face, clothing, and other
body parts away from the muffler and other hot
surfaces. Allow engine components to cool before
performing maintenance.
Do not change the engine governor speed or
overspeed the engine.

Servicing the Air Cleaner

Service Interval: Every 250 hours—For Kawasaki
engines—replace the primary air
filter (more often in dirty or dusty
conditions).
Every 250 hours—For Kawasaki
engines—check the safety air filter (more often
in dirty or dusty conditions).
Every 500 hours—For Kawasaki
engines—replace the safety air filter
(more often in dirty or dusty conditions).
Note:
Service the air cleaner more frequently if
operating conditions are extremely dirty or dusty.
Removing the Filters
1.
Park the machine on a level surface, disengage
the blade-control switch (PTO), and engage the
parking brake.
2.
Shut off the engine, remove the key, and wait
for all moving parts to stop before leaving the
operating position.
3.
Release the latches on the air cleaner and pull
the air-cleaner cover off the air-cleaner body
(Figure
40).
All manuals and user guides at all-guidesbox.com
1. Air-cleaner body
2. Primary filter
3. Latch
4.
Clean the inside of the air-cleaner cover with
compressed air.
5.
Gently slide the primary filter out of the
air-cleaner body
Note:
the body.
6.
Remove the safety filter only to replace it.
Inspecting the Filters
1.
Inspect the safety filter. If it is dirty, replace both
the safety and primary filters.
Important:
safety filter. If the safety filter is dirty, then
the primary filter is damaged.
2.
Inspect the primary filter for damage by looking
into the filter while shining a bright light on the
outside of the filter. If the primary filter is dirty,
bent, or damaged, replace it.
Note:
Do not clean the primary filter.
Installing the Filters
Important:
operate the engine with both air filters and the
cover installed.
1.
If you are installing new filters, check each filter
for shipping damage.
Note:
2.
If you are replacing the inner filter, carefully slide
it into the filter body
36
Figure 40
4. Air-cleaner cover
5. Safety filter
(Figure
40).
Avoid knocking the filter into the side of
Do not attempt to clean the
Holes in the filter appear as bright spots.
To prevent engine damage, always
Do not use a damaged filter.
(Figure
40).
g001883

Advertenties

Inhoudsopgave
loading

Deze handleiding is ook geschikt voor:

77292te

Inhoudsopgave