Download Inhoudsopgave Inhoud Print deze pagina

Unloading The Machine - Toro HDX SD 2000 Series Gebruikershandleiding

Zitmaaier van 132 cm
Verberg thumbnails Zie ook voor HDX SD 2000 Series:
Inhoudsopgave

Advertenties

Beschikbare talen

Beschikbare talen

1.
If using a trailer, connect it to the towing vehicle
and connect the safety chains.
2.
If applicable, connect the trailer brakes and
lights.
3.
Lower the ramp, ensuring that the angle
between the ramp and the ground does not
exceed 15 degrees
4.
Back the machine up the ramp
Figure 35
1. Back the machine up the
ramp.
5.
Shut off the engine, remove the key, and engage
the parking brake.
6.
Tie down the machine near the front caster
wheels and the rear bumper with straps, chains,
cable, or ropes
(Figure
regulations for tie-down requirements.
Figure 36
1. Tie-down loops

Unloading the Machine

1.
Lower the ramp, ensuring that the angle
between the ramp and the ground does not
exceed 15 degrees
2.
Drive the machine forward down the ramp
(Figure
35).
All manuals and user guides at all-guidesbox.com
(Figure
34).
(Figure
35).
2. Drive the machine forward
down the ramp.
36). Refer to local
(Figure
34).
g028043
g227761
32

Advertenties

Inhoudsopgave
loading

Deze handleiding is ook geschikt voor:

77292te

Inhoudsopgave