3. Press Start / Pause / Cancel button to
start the programme.
C
Any laundry added after the
drying process has started may
cause the clothes that are already
dried in the machine intermingle
with wet clothes and the result
will be wet laundry after the
drying process is over.
C
You may repeat laundry adding
or removing process as many
times as you desire during
drying. However, this process
will increase the programme
time and energy consumption
since the drying process will be
interrupted repeatedly. Therefore,
it is recommended to add laundry
before the drying programme has
started.
C
If you select a new programme by
turning the Programme Selection
knob while your machine is in
Pause mode, then the current
program is aborted and new
programme information is
displayed.
Do not touch the inner surface of
the drum when adding or taking
out laundry while a programme
is running. Surfaces of the drum
are hot.
5.13 Canceling the programme
If you want to stop drying and cancel the
programme for any reason after the machine
has started to run, press and hold the Start
/ Pause / Cancel button for 3 seconds. Lint
Filter Cleaning and Water Tank warning
symbols light up and "End" label appears on
the display as a reminder at the end of this
period.
Dryer / User Manual
As the inside of the machine will
A
be excessively hot when you
cancel the programme while the
machine is running, activate the
ventilation program to cool it
down.
Machine will stop if you turn
C
the Programme Selection knob
while it is operating. In this
case, current programme is
aborted and the new programme
information appears on the
display.
5.14 End of programme
Lint Filter Cleaning and Water Tank warning
symbols light up in the programme follow-
up indicator and "End" label appears on the
display when the programme comes to an
end. The loading door can be opened and the
machine becomes ready for a second cycle.
Press On / Off button to switch off the
machine.
C
If Anti-creasing function is
activated and the laundry is not
taken from the machine at the
end of the programme, 2-hours
Anti-creasing programme is
activated.
C
Clean the lint filter after each
drying. (See "Lint Filter / Loading
Door Inner Surface")
C
Drain the water tank after each
drying cycle. (See "Draining the
water tank")
55 / EN