Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Drying
Drying symbol lights up in all programmes
apart from ventilation.
Iron Dry
Starts to illuminate when the dryness level
reach Iron Dry step.
Cupboard dry
Starts to illuminate when the dryness level
reach Wardrobe Dry step.
Extra dry
Starts to illuminate when the dryness level
reach Wardrobe Dry Extra step.
Ventilation
Ventilation symbol illuminates when the
programme comes to an end.
C
Anti-creasing symbol will
illuminate at the end of the
programme if Anti-creasing
function is activated.
5.11 Child-proof Lock
Machine is equipped with a Childproof Lock
which prevents interfering with the current
programme flow by pressing any button. All
buttons except the On / Off button on the
control panel are deactivated when the Child-
proof Lock is active.
In order to activate the Childproof Lock, press
Audio Warning and Anti-Creasing buttons
simultaneously for 3 seconds.
To start a new programme after the current
programme is over or to interrupt the current
programme, the Child-proof Lock should be
deactivated. Press the same buttons for 3
seconds again to deactivate the Child-proof
Lock.
C
Lock symbol will appear on the
display when the Child-proof Lock
is activated.
C
Child-proof Lock is deactivated
when the machine is switched off
and on with On / Off button.
54 / EN
When the Child-proof Lock is activated:
• Display symbols will not change even
if the position of Programme Selection
knob is changed while the machine is
running or in halt.
• If the Child-proof Lock is deactivated
after changing the position of the
Programme Selection knob while the
machine is running, the machine stops
and new programme information is
displayed.
5.12 Changing the programme
after it has started
After the machine starts, you can change the
selected programme and dry your laundry in
a different programme.
1. If you want to select Extra Dry
programme instead of Iron Dry
programme, press and hold the Start /
Pause / Cancel button for 3 seconds to
cancel the programme.
2. Select Extra Dry programme by turning
the Programme Selection knob.
3. Press Start / Pause / Cancel button to
start the programme.
C
You can also select a new
programme by turning the
Programme Selection knob while
the machine is operating. In
this case, current programme is
aborted and the new programme
information appears on the
display.
Adding / removing laundry in Pause
mode
In order to add or take out laundry after the
drying programme has started:
1. Press Start / Pause / Cancel button to
switch the machine to Pause mode.
Drying process will stop.
2. While in Pause mode, open the loading
door, add or take out laundry and close
the loading door.
Dryer / User Manual
Advertenties
Inhoudsopgave
