3.3 Under counter installation
This product can be installed under a counter
if the height of the counter is sufficient.
While using undercounter dryer,
A
it should never be operated
without undercounter installation
part.
Dryer Depth
Stock number of
under-bench
2979700100
installation part
Leave at least 3 cm of space around the
sides and the rear wall of the product
when installing it under a counter or in a
cupboard.
3.4 Connecting to the drain
In products equipped with condenser
unit, water accumulates in the water tank
during the drying cycle. You should drain
accumulated water after each drying cycle.
You can directly drain accumulated water
through the water drain hose supplied with
the product instead of periodically draining
the water collected in the water tank.
1
3
Connecting the water drain hose
1-2
Pull hose at the behind of the dryer by
hand in order to disconnect it from where it
is connected. Do not use any tools to remove
the hose.
3
Connect one end of the drain hose
supplied with the dryer to the connection
point from where you removed the hose of
the product in previous step.
44 / EN
60 cm
54 cm
2973600100
2
4
4
Connect the other end of the drain hose
directly to the wastewater drain or to the
washbasin.
A
Hose must be fixed in every type
of connection. Your house will be
flooded if the hose comes loose
during water discharge.
C
Water drain hose should be
attached to a height of maximum
80 cm.
C
Make sure that the water drain hose
is not stepped on and it is not folded
between the drain and the machine.
3.5 Adjusting the feet
In order to ensure that the product operates
more silently and vibration-free, it must
stand level and balanced on its feet. Balance
the machine by adjusting the feet.
Turn the feet to left or right until the
machine stands level and firmly.
C
Never remove the adjustable feet
from their housings.
3.6 Electrical connection
For specific instructions for electrical
connection required during installation
(see 1.1.1 Electrical Safety)
3.7 Transportation of the dryer
1. Unplug the product before transporting it.
2. Remove the water drain (if any) and
chimney connections.
3. Drain the water in the product completely.
We recommend carrying the
3
dryer in upright position. If it is
not possible to carry the machine
in the upright position, we
recommend carrying it by tilting
towards the right side when
looked from the front.
Dryer / User Manual