Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
5.7 Auxiliary functions
Audio Warning
The machine will give an audio warning when
the programme comes to an end. If you do
not want the machine give an audio warning,
press the Volume Level button repeatedly
until "x" appears on the display. Use the same
button to adjust the volume level.
C
You can activate this function
either before or after the
programme starts.
Cancel
Audio warning
audio warning
level 1
Dryness level
Used to adjust the required dryness level.
More drying is performed compared to the
default settings when "+" sign appears
and less drying is performed when "-" sign
appears. Programme duration can change
depending on the selection.
C
You can activate this function
only before the programme has
started.
Anti-creasing
You can use Anti-creasing function to
prevent laundry from creasing if you will not
take the laundry out after the program has
come to an end. This program rotates the
laundry in every 240 second for 2 hours to
prevent creasing.
Anti-creasing is activated but the programme
is still running in the first display image
below. Drying cycle is completed and the
Anti-creasing step has started in the second
display image.
C
Press Anti-creasing button to
activate this function.
52 / EN
Audio warning
Audio warning
level 2
level 3
Changing the contrast
Adjust the display contrast in order to make
the symbols on the display appear clearer.
It may particularly be necessary to change
the contrast setting of the display when the
dryer is installed over a washing machine.
Press and hold the Spin Speed / Timer
Programme button for 3 seconds.
When the contrast is changed, all symbols on
the display will appear for 3 seconds in order
to indicate that the process is complete.
C
Perform the same procedure
to revert back to the previous
contrast setting.
5.8 Warning symbols
C
Warning symbols may differ
according to the model of your
machine.
Lint filter cleaning
When the programme is completed, a
warning symbol will appear to remind that
the filter needs to be cleaned.
C
If the Filter Cleaning symbol
flashes continuously, refer to
"Troubleshooting" section.
Water tank
When the programme is completed, a
warning symbol will appear to remind that
the water tank needs to be drained.
If the water tank becomes full while the
programme is running, the warning symbol
will start to flash and machine will pause.
Drain the water in the water tank and press
Start / Pause / Cancel button to resume the
programme. The warning symbol turns off
and the programme resumes operating.
Dryer / User Manual
Advertenties
Inhoudsopgave
