Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Technical data/General declaration of conformity
8. Technical data
Series
2/7
2/10
2/15
2/20
2/30
2/40
2/50
Installation location:
After installing the drive, mark the drive type in the technical data table and make a note of
the installation location.
Series 2 drives have a plug-in connection cable. Series 1 and series 3 drives have a 2.5 m
mains cable as standard which is permanently installed and cannot be changed!
The respective cable lengths and cable qualities for series 1, series 2 and series 3 drives can
be selected from the catalogue.
Connection cables must be ordered separately.
Ask for information about connecting special plug connectors.
Information for all drive types:
Nominal voltage: 230 V AC/50 Hz
Standby consumption: 0.5 W
Protection class: IP 44
Operating time: 4 min.
Radio frequency: 868.1 MHz
Transmission power: max. 10 mW
Note: The maximum radio range is up to 25 m indoors and up to 350 m outdoors.
Subject to technical modifications.
9. General declaration of conformity
SELVE GmbH & Co. KG hereby declares that the SE Breeze-com drive complies with the
fundamental requirements and other relevant specifications of Directives 2006/42/EC,
2014/53/EU, 2014/30/EU and 2011/65/EU. The declaration of conformity can be viewed on
www.selve.de
Torque
Speed
Nm
rpm
7
17
10
17
15
17
20
17
30
17
40
17
50
12
59
Power input
Output
A
0.41
0.55
0.66
0.75
0.95
1.5
1.5
W
95
124
152
172
220
345
345
EN
Advertenties
Hoofdstukken
Inhoudsopgave
