Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
commeo commissioning/setting by radio
If multiple receivers have been found, the selected receiver can be changed by pressing the
SELECT button for 1 second. The next receiver makes a short confirmation run. Only one
receiver can be selected at one time for moving, setting and programming it.
SELECT mode
Receiver X
Exit SELECT mode
To exit SELECT mode (the status LED slowly flashes orange), press the
SELECT button for 3 seconds.
3 s
Status LED indicator on the transmitter for the various operating modes
Transmitter mode
Operation mode
SELECT mode
CONFIGURATION mode
(only for authorised qualified personnel),
see 5.2.7.
Power interruption/
programmed transmitter
Receiver 1
SELECT 1 s
SELECT 1 s
Receiver 3
Status LED indicator
Lights up when a button is pressed
Slowly flashes orange
Slowly flashes green or red
47
SELECT 3 s
SELECT 1 s
Receiver 2
SELECT 1 s
EN
Advertenties
Hoofdstukken
Inhoudsopgave
