Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
B
Changing the light
• This product contains a light source exempted of energy efficiency class. Light source
in this product can only be replaced by qualified professionals. Please contact after-sales
service if the light source fails. The light source shall be removed at the end of the product's
useful life, with sorting and recycling done separately.
Starting
• After transportation, please let the product stay for more than 2 hours before turning on
the power, otherwise it will lead to a decrease in cooling capacity or a damage to the product.
• Before putting any fresh or frozen foods, the refrigerator shall have run for 2-3 hours, or
for above 4 hours in summer when the ambient temperature is high.
• Please pull out the plug in case of power failure or cleaning. Do not connect the freezer to
power supply within five minutes to prevent damages to the compressor due to successive
starts.
Using the appliance
1. Please take out the plug before removal.
2. Remove the lampshade with a screwdriver.
3. Take down the lamp panel.
4. Remove the connection terminal.
12
EN
Advertenties
Hoofdstukken
Inhoudsopgave
Probleemoplossen
