Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
B
• Insert the middle pad (left- or right-hand side) and the metal pad block (left- or right-hand
side) on the other side of the bottom of the lower door (Pic. I).
• Rotate the middle hinge 180°. Fix the lower door on the lower hinge and then fix the middle
hinge (Pic. J).
• Before fixing the upper hinge (left- or right-hand side), take the upper door and ensure
that this is aligned horizontally and vertically so that the seals are correctly positioned on
each side. Then insert the upper hinge (left- or right-hand side) and screw this to the top
of the appliance (Pic. K).
• Tighten the hinge cover screw (left- or right-hand side) and replace the cap (Pic. L).
Level the feet (see Fig.
Adjust the appliance level using the adjustment screws at the front of the appliance.
:
Note
If the appliance level is not adjusted properly, the doors and the magnetic catches will
not align correctly.
Placement
Install this appliance in an area where the ambient temperature matches the climate class shown
on the rating plate:
Location
• The appliance must be installed at a safe distance from heat sources such as radiators,
boilers, direct sunlight, etc. Ensure that air can circulate freely at the rear of the appliance.
For optimum operation, if the appliance is placed under a wall cabinet, the distance between
the top of the appliance and the wall cabinet must be at least 100 mm. In as far as possible, it
is always preferable not to position the appliance under wall cabinets. The appliance can be
levelled precisely thanks to one or more adjustable feet at the bottom.
Using the appliance
)
7
EN
Advertenties
Hoofdstukken
Inhoudsopgave
Probleemoplossen
