Download Inhoudsopgave Inhoud
Deel
Print deze pagina
  1. Handleidingen
  2. Merken
  3. Tronic Handleidingen
  4. Batterijladers
  5. QI TCP 10 A1
  6. Gebruiksaanwijzing en veiligheidsinstructies

Led Indicator 2 Status; Led-Indicator - Tronic QI TCP 10 A1 Gebruiksaanwijzing En Veiligheidsinstructies

Verberg thumbnails Zie ook voor QI TCP 10 A1:
Inhoudsopgave

Advertenties

Beschikbare talen

Beschikbare talen

3. LED indicator
seconds when the product is under standby mode
and there is no mobile device on the Qi charging
surface
1
4. Place the mobile device on the Qi charging surface
1
. Make sure the center of the device is aligned
over the center of the Qi charging surface. Charging
will begin on contact. The LED indicator
blue when charging is active on Qi charging surface
.
1
Protective covers that protect the mobile device may
interfere with the charging process. In this case, the
mobile device must be removed from the protective
cover.
NOTE: The charging power is up to 10 W,
*
depending on the power adapter used.
LED indicator
The product uses an LED indicator to show the
operating status:
LED indicator
Blue lights up two seconds Starting process
Blue lights up
Blue is flashing
will light up blue for approx. two
2
.
status
2
Status
(Boot phase) / Standby
Charging/
Full Charge
Metal obstruction
GB/IE/NI
lights up
2
15

Advertenties

Inhoudsopgave
loading

Gerelateerde Handleidingen voor Tronic QI TCP 10 A1

Gerelateerde Producten voor Tronic QI TCP 10 A1

Deze handleiding is ook geschikt voor:

377608 2101100336569

Inhoudsopgave